To: | km1h@jeremy.mv.com, maflynn@att.net, amps@contesting.com |
---|---|
Subject: | Re: [Amps] 240V Outlet |
From: | Gudguyham@aol.com |
Date: | Mon, 10 Aug 2009 08:21:37 EDT |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
In a message dated 8/9/2009 9:49:43 P.M. Eastern Daylight Time, km1h@jeremy.mv.com writes: Going to #10 requires >> all different plugs and outlets and the cost about goes thru the roof >> compared to a 20A feed. No really because you can run #10 wire from a breaker panel to a location where an amp is to avoid voltage drop and then simply use a 20A breaker and plug on that wire. You don't have to use 30A breaker or plug. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] 240V Outlet and money, David C. Hallam |
---|---|
Next by Date: | Re: [Amps] 240V Outlet, David C. Hallam |
Previous by Thread: | Re: [Amps] 240V Outlet, David C. Hallam |
Next by Thread: | Re: [Amps] 240V Outlet, Paul Christensen |
Indexes: | [Date] [Thread] [Top] [All Lists] |