Chris -- I use an ordinary chassis for a meter shield.
http://www.somis.org/PBox_top_inside.jpeg
The chassis at the top of the picture is the meter shield. The meter
leads are fed through a Cu tube leading down to the chassis.
Front view showing meters:
http://www.somis.org/PBox_all.JPEG
On Mar 26, 2005, at 12:48 PM, Chris wrote:
> Hello to the group,
>
> I have a question in regards to rf getting into my filament meter. I
> put
> chokes on the leads to the meter to keep rf out, but its not coming
> into
> the meter thru the wires, it just stray rf from the deck. The meter is
> mounted on the face of the deck. Any suggestion how I may shield the
> meter or fix this?
>
> Chris
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
