Amps
[Top] [All Lists]

[AMPS] RE: High Power Connectors

To: <amps@contesting.com>
Subject: [AMPS] RE: High Power Connectors
From: W8AV@aol.com (W8AV@aol.com)
Date: Tue, 21 Nov 2000 19:05:42 EST
    Just another .02 worth.  I had N connectors on my isolation coils (to get 
the 20 and 40 meter antenna coaxes across the base insulator) on my big tower 
that I also series feed on 160.  After a couple years with the temperature 
changes (in Ohio) the center conductor pin on the N would pull back far 
enough to allow a haphazard connection and consequently arcing to occur 
inside the connector.  Noticed it during a big 40 meter run on ARRL DX one 
year when all of a sudden  signals went away.  Changed it out in the middle 
of the night to  UHF connectors and have not had a problem since.
    Needless to say all the N's have disappered from my station for HF.

73......de Goose, W8AV

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>