Paul
Deionized water is what you have to use for high resistivity water.
Distilled is not acceptable as the ionic content is now low enough.
DI is made by either using distilled or well filtered water, and
running it through cation and/or anion resin exchange bottles, from
companies like Culligan. The 'Culligan Man' can also provide DI water
I bet. As you know, distilled water is usually produced from a
condensation process. However, I would wager to bet that the cheapest
source would be used in bottled 'distilled' water for Walgreens
retail, and that sometimes you are getting DI instead of distilled,
hence the lower conductivity of the Zephyr hills brand. Call 'em up
and see?
73
John
K5PRO
>
>Date: Tue, 6 Feb 2007 10:14:35 -0500
>From: "Paul Christensen" <w9ac@arrl.net>
>Subject: Re: [Amps] 3CV1500A7
>.......
>I just recently purged the H2O system on my amp and it's as strong and
>silent as ever. Quick horror story: I purchased a gallon of "Brand X"
>distilled water while standing in line at the local Walgreens. Purged the
>water and added the Brand X water. Powered-up and Leakage current went
>off-scale. Either I got a bad jug or that company is re-selling tap water
>as "distilled." Purged the amp again three times and added ZephyrHills
>brand and leakage current was back to zero!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|