Ok distance from the amp, as described below, can make a difference. on
the level of blocking harmonics.
Now how about on recieve side if you want say youre on 20 and want to
block 40, does this distance still apply?
On Field days we just had a "T" on the back of the radio and hooked as
needed what stub was needed to block the offending station.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 9/9/2015 9:51 AM, Randall K Martin wrote:
Jeff, regarding stubs on six-pack, I place mine on the six individual
band ports. A few are "Tee-d" in right at the SO239 on the six pack,
but most are connected with a "T" a short distance away.
I need to rethink this, based on the knowledge that there is a proper
distance that the stubs should be placed away from the amplifier
output, and that the distance also depends on the tank circuit of the
amp. My amps are different, and I couldn't tell you how long the coax
lines are between the amps and the six pack without measuring them.
I can say that my stubs do make a difference.
Frank W3LPL can you steer me towards any references discussing how to
eliminate RFI from T2X controller boxes? I have three of them.
73 Randy K0EU
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|