In a message dated 96-02-28 14:53:44 EST, you write:
> Some time delay is required for the ALC circuitry in the 706 to kick in and
cause the >output power to be cut back to the proper amount.
It seems to me that I read the same scenario and caution applied to 2M HTs
when driving a brick. When "low power" is selected, it seems like they would
xmit on high power for a wee bit until the ALC kicked in and dropped to the
"low power" level. It was raising havoc with the 2M bricks as well.
73, Steve K7LXC
|