To: | cq-contest@contesting.com |
---|---|
Subject: | Re: [CQ-Contest] low output on IC756Pro II/solved |
From: | "AB2E Darrell" <ab2e@hotmail.com> |
Date: | Tue, 28 Oct 2003 15:59:42 -0500 |
List-post: | <mailto:cq-contest@contesting.com> |
Hello Everyone, Thanks to everyone who replied with suggestions or a similar experience. Several of you asked me to post the solution, so here it is. I recently had the rig on a flight from EU, and Icom says it's likely the vibration changed an internal setting or 2. The solution is to adjust R507 on the Main A board (remove the bottom cover). This pot is tiny, and also the label is almost an inch away due to a chassis screw and other components in the area. Locate the adj pot for the Speech Syth, which is also in that area, or the chassis screw. Before adjusting, set your xmit freq to 14.10000, mode=RTTY,Tuner - off, RF Power - Max. Next adjust R507 (using a dummy load) for 100 watts. This solved the problem. Before the adjustment I had 75W out, now I can easily get 100W out and all is again well. This solution was provided by Icom tech support over the phone. 73 Darrell AB2E ----- Original Message -----From: "AB2E Darrell" <ab2e@hotmail.com> To: <cq-contest@contesting.com> Sent: Monday, October 27, 2003 2:57 PM Subject: [CQ-Contest] low output on IC756Pro II _________________________________________________________________ Cheer a special someone with a fun Halloween eCard from American Greetings! Go to http://www.msn.americangreetings.com/index_msn.pd?source=msne134 --------------------------------------------------------------- The world's top contesters battle it out in Finland! THE OFFICIAL FILM of WRTC 2002 now on professional DVD and VHS! http://home1.pacific.net.sg/~jamesb/ --------------------------------------------------------------- _______________________________________________ CQ-Contest mailing list CQ-Contest@contesting.com http://lists.contesting.com/mailman/listinfo/cq-contest |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [CQ-Contest] NW7US Propagation Bulletin - 28-X-2003 - 1900Z, NW7US |
---|---|
Next by Date: | RE: [CQ-Contest] Feedback of CQWW SSB, George Harlem W1EBI |
Previous by Thread: | [CQ-Contest] NW7US Propagation Bulletin - 28-X-2003 - 1900Z, NW7US |
Next by Thread: | Re: [CQ-Contest] low output on IC756Pro II/solved, Bill Turner |
Indexes: | [Date] [Thread] [Top] [All Lists] |