Yan,
Thanks for the suggestions. But I found that ViewProp from ZL2HAM can do it
based on physical QTH locations (it does a QRZ.COM lookup for each entry).
It's a very slick application.
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
-----Original Message-----
From: XV4Y (Yan)
Sent: Saturday, July 04, 2015 8:12 PM
To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Beam heading analysis from Field Day log
Hi,
QScope does that.
https://www.qscope.org/
However it can only use the information you provide :
- with ADIF file, it will use geolocation from Gridsquare locator if
available, if not, it will guess geolocation from callsign using AD1C
BigCTY.
- with Cabrillo, the only way is to guess geolocation from callsign
What I would do if I were you :
- Import my Cabrillo/ADIF into DXKeeper (or any other "fully featured"
logbook software)
- USe DXKeeper to retrieve Gridsquare info from QRZ.com or another callbook
- export the ADIF file and import it to QScope
73,
Yan.
---
Yannick DEVOS - XV4Y
http://xv4y.radioclub.asia/
http://varc.radioclub.asia/
Le 4 juil. 2015 à 23:00, cq-contest-request@contesting.com a écrit :
Message: 2
Date: Fri, 3 Jul 2015 20:54:07 -0500
From: "Jeff AC0C" <keepwalking188@ac0c.com>
To: <cq-contest@contesting.com>
Subject: [CQ-Contest] Beam heading analysis from Field Day log
Message-ID: <C490D036540C4A00B5B02F2B9137168D@w520>
Content-Type: text/plain; charset="Windows-1252"
I have been using SH5 to do log analysis. But for field day with mostly
domestic locations, the results are not good.
Is there a program available that would show what the beam heading
distribution is for a FD cabrillo or ADIF log?
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|