Robert Naumann writes:
>You may have a problem with the 850. One of mine would "receive" from the
>computer, but would not "transmit" data to it. I found that something
>"hangs" on the digital board and all you need to do is disconnect all the
>cables connected to it (inside the 850) and it will reset and come back to
>life. You can verify this in TR. See if the frequency displayed actually
>changes when you spin the knob. My suspicion is that it may not. The only
>difference is that TR does not give you an error message that the radio is
>not talking like CT does.
I have touched both of the radios and computers that W5VX is
talking about.
Bill is correct, they work normally with TR-Log - frequency and everything.
Both radios are using the Kenwood ifc-232 level converter.
--
George Fremin III "I'm talkin' 'bout that outlaw X
Austin, Texas It's cuttin' through the air.... "
K5TR (ex.WB5VZL)
512/416-7010 -- "Heard it on the X"
geoiii@kkn.net -- ZZ Top
http://www.kkn.net/~k5tr
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|