I had the same problem with the NEQP adif file
generated by CT. Fortunately I caught it before I
submitted. I corrected the entries from SSB to CW.
The C2A file also did not generate the state entries
for importing into Mlog which I use for daily logging.
I wound up using the cabrillo file generated by CT
which I first had to correct, then found a reverse
program to generate an ADIF file from the cabrillo
file so that I can import the state into my logging
program.
Counties I did by hand and since I am from New
England, there was a manageable amount.
In general, though, CT has been good. It's all the
interfaces that have to be met.
Joe
W1TW
--- N7MAL <N7MAL@citlink.net> wrote:
> This is for info only: I found errors with my
> submission, from my master
> log, as a result of a corrupt CT file. My CQP
> contacts for 2000 magically
> changed from a CW to SSB frequency in the ADI file
> generated by CT. The
> mode, however, did not change. I loaded the BIN file
> and there definitely no
> SSB contacts there. I can't even remember the last
> time I ever had a SSB
> contact during CQP. Over the weekend I'll review my
> entire submission, 5,000
> QSO's, looking for other errors. I'm going to
> estimate more than 50% of my
> QSO's are from contests using CT.
>
> MAL N7MAL
> BULLHEAD CITY, AZ
> www.citlink.net/~suzyq/N7mal.htm
> www.geocities.com/n7mal
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
|