Hi All,
Neither TRX-Manager nor Log-EQF have any problem tracking frequency changes
on my FT1000MP. They poll it frequently; it doesn't send info unsolicited.
I had trouble getting CT9.50 and CT9.40 to follow my MP's frequency changes
even when (properly) booted to DOS. They could command the MP to change bands
but would zero the band stack register to the bottom of the CW band. I wound up
getting CT9.40 to behave in a WIN98 DOS window - it followed the MP fine
throughout CQWW SSB as long as we did all freq/band changes via the MP.
I haven't a clue about the misbehavior. I had no network, voice keyer, (or
CW keyer) so I wouldn't take this as a DOS window endorsement - just a lucky
workaround on the day before the contest.
After the contest, I used CT9.51 to create the Cabrillo output.
cheers & 73, Tony
Tony Armendariz, AD6ID
ad6id@arrl.net
FISTS 3535 WPSS ARRL
At 12:09 AM 11/9/00 +0000, David Robbins wrote:
>
>ct should only report frequency to the network when it changes, at least that
>is
>the way it has always been that i know of. so if the knob stays put it doesn't
>send anything on the network. of course the other stations would still show
>the
>last frequency reported in the alt-j window anyway. i have seen an ft-1000mp
>occasionally stop talking to ct so even if you move the knob ct doesn't report
>it, but i'm not sure if that is the mp or ct's problem.
>
>Rick Dougherty wrote:
>>
>> Ok you CT experts...a question...some of the 5 1000mp's we had in the
>> station for our m-m stopped reporting freq after about 10mins...ie if they
>> were used as the run station on a band and did not change freq..the
>> reported freq would cease reporting to the remainder of the network...by
>> just barely moving the freq knob, it would begin reporting again...is there
>> a way to keep it reporting regardless of where the knob stays? Is this what
>> the command radio polling is for? Hate to sound so dense...de Rick nq4i
>>
>> --
>> WWW: http://www.k1ea.com/
>> Submissions: ct-user@contesting.com
>> Administrative requests: ct-user-REQUEST@contesting.com
>> Problems: owner-ct-user@contesting.com
>
>--
>David Robbins K1TTT
>e-mail: mailto://k1ttt@berkshire.net
>web: http://www.berkshire.net/~robbins/k1ttt.html or http://www.k1ttt.net
>AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
>--
>WWW: http://www.k1ea.com/
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>Problems: owner-ct-user@contesting.com
>
>
>
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|