CT-User
[Top] [All Lists]

[ct-user] Re: Radio Overrun Com1

To: <ct-user@contesting.com>
Subject: [ct-user] Re: Radio Overrun Com1
From: C Logan Dietz <cdietz@swbell.net> (C Logan Dietz)
Date: Mon, 05 Mar 2001 19:58:40 -0600
>I am having trouble getting CT 9.57.004 to communicate with an Icom
>756pro or a 775dsp.  When I turn it all on with the radio on 10 meters,
>CT starts out on 20 meters. If I enter a 10 meter freq into CT I get a
>"Radio Not Echoing" message then, if I turn the radio tuning dial, I >get
>a "Radio Overrun Com1" message and CT jumps back to 20 meters...

>It worked ok yesterday, What gives?

As a follow up...  I finally changed the baud rate to 1200 and
everything worked ok.  Since I had the problem with 2 different radios,
does this mean my serial ports are not set up for 19,200 baud rate?

Chuck, W5PR

--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>