>I just updated to a new computer using Windows XP and the computer no
>longer has the little 3.5" floppy drive and has no Drive A to use for
>saving the log as specified in the CT manual....see page 42 "Saving the
>Log File." Is there a way to change the CTWIN software to use a drive
>letter other than drive A? W7UPF donsay2 at cox.net
If you have a USB memory stick, you can use it and
simply remap it to the A: drive. Insert the USB
memory stick in one of the front panel USB sockets.
In my case, it turned out to be the J: drive. It
will likely be something else on other systems.
Then, I went to the Windows Desktop and right-clicked
on "My Computer." Clicked on "Manage" and "Disk
Management." All the drives appear in the upper right
portion of the resulting window. Then, I right-clicked
on the J: drive and "Change Drive Letter and Paths"
to call it the A: drive.
That probably sounds harder than it really is.
It's just a few appropriate clicks to change the
drive letter.
Of course, the flashing light on the USB memory
stick is a little annoying... :-)
73,
Bob
K3PH
--
+----------------------------------------------+
| Bob Schreibmaier K3PH | E-mail: k3ph@ptd.net |
| Kresgeville, PA 18333 | http://www.dxis.org |
+----------------------------------------------+
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|