Norm
What version do you have running on the AP?
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Norm Young
Sent: Thursday, May 16, 2002 12:52 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Anyone see anything glaringly wrong here?
I've hooked my first RG/Karlnet CPE up to the network, and it doesn't
work. I can connect to the AP using an XP laptop with an Orinoco card
and see the AP the backhaul, router, and the Internet. But when I try
the RG (running SR-4000, the SOHO single NAT software) with bridging
"on", Watchdog Timer "on" all else "off" under "General Setup", I can
see the AP in the TurboCell Station Entries, can do a link test, but
nada else. Can't ping the AP or the backhaul (but can ping the CPE).
For the moment, I'm bridging all protocols on the AP, and like I said,
it seems to work fine with the laptop, but go to the RG (which is setup
the same as my backhaul---and the backhaul works fine) and nothing.
Any ideas?
Norm
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|