Mark
We have custom enclosures kits designed for use with the Karlnet boards
basically is everything you need besides the boards. Don?t let the
single qty sample price get in the way of emailing me off list for qty
numbers ;)
http://www.demarctech.com/products/reliawave-ode/reliawave-rw-ode-8585-k
it.html. We also can add another hole for the dual port boards.
Also FYI we have 18dBi antenna enclosures for the boards also.
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Mark Wauchope
> Sent: Friday, March 14, 2003 1:17 PM
> To: 'Karlnet Mailing List'
> Subject: RE: [Karlnet] Intro - Board Specs
>
>
> I am curious what people are using as a chassis or enclosure
> for these boards.
>
> Also, I know how important price is to most of us especially
> when it comes to CPE equipment so I am going to put in a plug
> for my vendor of KarlNet products:
>
> Winncom Technologies sells the software licenses for about
> 20% cheaper than Charles and the new boards are $30-$40
> cheaper than Charles quoted here on the list. I had many
> people ask me who my vendor was last time I mentioned the
> price of the software licenses. Charles does have
> significantly more knowledge of the products and is able to
> offer better support but if price is your bottom-line, then
> check out Winncom - http://www.winncom.com Talk to Polina
> Sorg, she is an excellent saleswoman. BTW, I do not receive
> anything by recommending Winncom. I just know how important
> price is to us when looking for CPE equipment (infrastructure
> equipment too, I guess).
>
> --
> Mark Wauchope, Director of Engineering, Kivanet Inc
> 776 East Second Avenue Suite 207 Durango, CO 81301
> 970-749-2711 http://www.ekiva.net/ mark@ekiva.net
>
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com
> > [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Caleb Carroll
> > Sent: Wednesday, March 12, 2003 2:10 PM
> > To: Karlnet Mailing List
> > Subject: RE: [Karlnet] Intro - Board Specs
> >
> >
> > I just recieved the new boards and tried 802.11b compatible
> > access point mode.
> >
> > It doesn't work with Prism 2.5 cards.
> >
> > Works with Orinoco Gold, Avaya Gold, Avaya Silver.
> >
> > *********** REPLY SEPARATOR ***********
> >
> > On 2003-Mar-08 at 8:51 PM Charles Chia Sheng Wu wrote:
> >
> > >well...we haven't had any luck w/ the prism 2.0 - waiting
> > for the prism
> > >2.5 cards to come in
> > >
> > >-Charles
> > >
> > >-----Original Message-----
> > >From: karlnet-bounces@WISPNotes.com
> > >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Caleb Carroll
> > >Sent: Saturday, March 08, 2003 6:24 PM
> > >To: Karlnet Mailing List
> > >Subject: RE: [Karlnet] Intro - Board Specs
> > >
> > >
> > >Charles, Are you ever going to tell us if the new boards work in
> > >802.11b mode with Prism 2.5 cards or are you going to keep
> > that secret
> > >to yourself?
> > >
> > >*********** REPLY SEPARATOR ***********
> > >
> > >On 2003-Mar-08 at 1:33 PM Charles Chia Sheng Wu wrote:
> > >
> > >>ok...
> > >>
> > >>after a brief recall false alarm (KarlNet issue), boards
> > are shipping
> > >again
> > >>and everyone is happy
> > >>
> > >>Pricing is as follows
> > >>
> > >>1 Port Boards:
> > >>
> > >>Q1-9: $150
> > >>Q10-29: $145
> > >>Q30-49: $140
> > >>Q50+: Offlist
> > >>
> > >>2 Port Boards:
> > >>
> > >>Q1-9: $185
> > >>Q10-29: $177.50
> > >>Q30-49: $172
> > >>Q50+: Offlist
> > >>
> > >>Also...there are even better deals if you buy software w/
> the board
> > >>
> > >>-Charles
> > >>
> > >>-----Original Message-----
> > >>From: karlnet-bounces@WISPNotes.com
> > >>[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Bill Fisher
> > >>Sent: Saturday, March 08, 2003 10:42 AM
> > >>To: Karlnet Mailing List
> > >>Subject: Re: [Karlnet] Intro - Board Specs
> > >>
> > >>
> > >>
> > >>Charles there are no List-Nazi's here. Feel free to post
> > your pricing
> > >>if you like.
> > >>
> > >>Bill Fisher
> > >>
> > >>
> > >>
> > >>----- Original Message -----
> > >>From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
> > >>To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> > >>Sent: Sunday, March 02, 2003 11:10 PM
> > >>Subject: RE: [Karlnet] Intro - Board Specs
> > >>
> > >>
> > >>> yes - offlist (we shipped our first boards on Thursday)
> > >>>
> > >>> -Charles
> > >>>
> > >>> -----Original Message-----
> > >>> From: karlnet-bounces@WISPNotes.com
> > >>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Nate McLain
> > >>> Sent: Sunday, March 02, 2003 10:01 PM
> > >>> To: Karlnet Mailing List
> > >>> Subject: RE: [Karlnet] Intro - Board Specs
> > >>>
> > >>>
> > >>> Charles,
> > >>>
> > >>> Do you have these in stock currently??
> > >>> If so I'm ready to order a few.
> > >>>
> > >>> Nate
> > >>>
> > >>> -----Original Message-----
> > >>> From: karlnet-bounces@WISPNotes.com
> > >>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Charles Chia
> > >>> Sheng Wu
> > >>> Sent: Sunday, March 02, 2003 8:51 PM
> > >>> To: Karlnet Mailing List
> > >>> Subject: RE: [Karlnet] Intro - Board Specs
> > >>>
> > >>>
> > >>> Full Version WPAP+ / WPBASE+
> > >>> SPECIFICATIONS
> > >>> CPU ST-PC Elite @ 133MHz
> > >>> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> > >>> RAM 16MB on-board DRAM for programs and data.
> > >>> Storage 512KB on-board Flash ROM (BIOS and
> > >>> KarlNet firmware); Linear Flash support for factory
> loading. Data
> > >>> Interface PCMCIA / CARDBUS sockets
> > >>> 3.3/5V Selectable operations
> > >>> 10/100mbps Auto-sense Fast Ethernet
> > >>> Power Input 9V to 15V DC in, either from the Input Jack,
> > or Power over
> > >>> Ethernet input from the RJ45 port supports the proposed
> > IEEE 802.3af PoE
> > >>> Standard. Power consumption ~9W fully loaded.
> > >>> Second Ethernet port may be used as a PoE injector when
> > DC power is
> > >>applied
> > >>> to first Ethernet Port.
> > >>> Additional Features
> > >>> Fully Industrial Strength Chipset
> > >>> Reset / Reload Pushbutton Switches,
> > >>> Hardware Watchdog Timer,
> > >>> Programmable GPIO register for Input/Output,
> > >>> FCC Class A Certification
> > >>> Compact Flash Socket for Future Upgrades
> > >>> Piezo Buzzer
> > >>> Software control for header for external fan (voltage
> > supply, 5 volt
> > >>> / 1
> > >>AMP
> > >>> or sync current)
> > >>> Speaker output header
> > >>> LEDs for Board Power status, Link/ Activity for
> Ethernets & Link /
> > >>Activity
> > >>> for PCMCIA / Cardbus sockets
> > >>> Form Factor 3.8" x 5.2" x 1.1" basic board size, with dual-side
> > >>> major component placement, the same basic mounting holes as the
> > >>> RG-1000. Operating Temperature -30° to 55° Celsius (° to 131°
> > >>> Fahrenheit) predicted temperature range, with non-condensing
> > >>> humidity.
> > >>>
> > >>> Lower cost Version WPCPE+
> > >>> SPECIFICATIONS
> > >>> CPU ST-PC Elite @ 133MHz
> > >>> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
> > >>> RAM 16MB on-board DRAM for programs and data.
> > >>> Storage 512KB on-board Flash ROM (BIOS and
> > >>> KarlNet firmware); Linear Flash support for factory loading.
> > >>> Compact
> > >>Flash
> > >>> socket for future software upgrades.
> > >>> Data Interface
> > >>> PCMCIA / CARDBUS sockets
> > >>> 3.3/5V Selectable operations
> > >>> 10/100mbps Auto-sense Fast Ethernet
> > >>> Power Input 9V to 15V DC in, either from the Input
> Jack, or Power
> > >>> over Ethernet input from the RJ45 port supports the
> proposed IEEE
> > >>> 802.3af PoE Standard. Power consumption ~9W fully loaded.
> > >>> Additional Features Fully Industrial rated Chipset
> > >>> Reset / Reload Pushbutton Switches,
> > >>> Hardware Watchdog Timer,
> > >>> Programmable GPIO register for Input/Output,
> > >>> FCC Class A Certification
> > >>> Compact Flash Socket for Future Upgrades
> > >>> Piezo Buzzer
> > >>> Software control for header for external fan (voltage
> > supply, 5 volt / 1
> > >>AMP
> > >>> or sync current)
> > >>> Speaker output header
> > >>> LEDs for Board Power status, Link/ Activity for
> Ethernets & Link /
> > >>Activity
> > >>> for PCMCIA / Cardbus sockets
> > >>> Form Factor 3.8" x 5.2" x .9" basic board size, with
> > dual-side major
> > >>> component placement, the same basic mounting holes as the
> > RG-1000.
> > >>> Operating Temperature -30° to 55° Celsius (-22° to 131°
> > Fahrenheit)
> > >>> predicted temperature
> > >>range,
> > >>> with non-condensing humidity.
> > >>>
> > >>>
> > >>> -----Original Message-----
> > >>> From: karlnet-bounces@WISPNotes.com
> > >>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of George Minich
> > >>> Sent: Sunday, March 02, 2003 7:54 PM
> > >>> To: Karlnet Mailing List
> > >>> Subject: Re: [Karlnet] Intro
> > >>>
> > >>>
> > >>> Please post all hardware and pricing.
> > >>>
> > >>> Thanks
> > >>>
> > >>> George
> > >>>
> > >>> ----- Original Message -----
> > >>> From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
> > >>> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> > >>> Sent: Sunday, March 02, 2003 8:47 PM
> > >>> Subject: RE: [Karlnet] Intro
> > >>>
> > >>>
> > >>> > >Hi All,
> > >>> >
> > >>> > Hi Caleb
> > >>> >
> > >>> > >I've been using Karlnet for about a year and I only just now
> > >>> > >stumbled
> > >>> > accross this mailing list. I've been going through
> > >>> > >the past threads looking for some of the problems I've
> > >>> > >experienced.
> > >>> >
> > >>> > that's good
> > >>> >
> > >>> > >I've seen a few posts regarding Karlnet's "support"
> > for Linux.
> > >>> > >If
> > >>anyone
> > >>> > is looking for help with the Linux drivers, pay a
> > >>> > >visit to my FTP site. You will find RPM's and
> > documentation for
> > >>getting
> > >>> > the Linux TurboCell drivers working.
> > >>> > >ftp://ftp.pathcom.ca/i-Path/TurboCell/Linux
> > >>> >
> > >>> > >About me.. I'm managing a small WISP west of
> Calgary, Alberta,
> > >Canada.
> > >>> The
> > >>> > company I work for, Pathcom Wireless Inc.,
> > >>> > >provides high-speed internet service in an area of
> roughly 1000
> > >square
> > >>> > miles using 13 base stations (Karlnet SA-4400 on AP-
> > >>> > >1000). Backhaul from each base station to our fiber
> > gateway is
> > >>> > >via
> > >>> various
> > >>> > high-bandwidth radios.
> > >>> >
> > >>> > cool
> > >>> >
> > >>> > >I've been using high-power, 23dBm Prism 2.5 based PC Cards
> > >sucessfully
> > >>in
> > >>> > RG-1100's and AP-1000's for a few months now with
> > >>> > >only one problem that re-occured a couple of times:
> > overheating.
> > >>> > >The
> > >>two
> > >>> > brands that I've used are: Zcomax XI-325HP
> > >>> > >(Expensive, $179!), Netgate (re-branded Senao) NL-2511CD Plus
> > >>> > >Ext2
> > >>($95
> > >>> > from www.netgate.com)
> > >>> >
> > >>> > that's why you need the new KarlNet board - just released, but
> > >>> > built
> > >to
> > >>> > withstand the greater power draw of the prism cards
> > >>> >
> > >>> > >What I could use some help with:
> > >>> >
> > >>> > >- I was trying to set up a Wi-fi hotspot and wanted to
> > use a high
> > >>power
> > >>> > card. I was shocked when I discovered that although
> > >the AP-1000
> > >>> > with
> > >>one
> > >>> > of the Netgate cards operates flawlessly when setup as
> > a TurboCell
> > >base
> > >>> > station, the AP-1000 will not
> > >>> > >finish booting when it is set up as an 802.11b
> > compatible access
> > >>point!
> > >>> >
> > >>> > You need the new 2 card slot, 2 port KarlNet board -
> > retails for
> > >>> > $185
> > >-
> > >>> > check the archives for more details (or I can post em again if
> > >>> > people
> > >>want
> > >>> > to see em)
> > >>> >
> > >>> > >So far, I've tried to work around the problem by:
> > >>> > >- Flashing the Netgate card with 4 different versions
> > of the base
> > >>> > >&
> > >>> station
> > >>> > functions firmware from Intersil.
> > >>> > >- Trying to use one of the Zcomax cards in 802.11b
> > access point
> > >>> > >mode.
> > >>> (same
> > >>> > problem, AP-1000 will not finish booting)
> > >>> >
> > >>> > do you have 2 cards in your AP-1000? if so, which cards?
> > >>> >
> > >>> > >Anyone have experience with using Prism 2.5 based cards in
> > >>> > >802.11b
> > >>mode?
> > >>> > According to Karlnet release notes for v4.31
> > >>> > >firmware, Intersil Prism 2.5 based cards are supposed
> > to work in
> > >>> > >both
> > >>> > TurboCell and 802.11 mode. See:
> > >>> >
> > >>>
> > >>>http://www.karlnet.com/Documents/ReleaseNotes/Software%20Re
> > lease%20ve
> > >>>rsion
> > >%
> > >>> > 204.31.htm#_Toc32119586
> > >>> >
> > >>> > IMO, it's probably not a firmware issue, rather, if you have 2
> > >>> > cards
> > >>> loaded
> > >>> > in the AP-1000, it's a power draw issue
> > >>> >
> > >>> > -Charles
> > >>> >
> > >>> > _______________________________________________
> > >>> > Karlnet mailing list
> > >>> > Karlnet@WISPNotes.com
> > >>> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>> >
> > >>> >
> > >>>
> > >>> _______________________________________________
> > >>> Karlnet mailing list
> > >>> Karlnet@WISPNotes.com
> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>>
> > >>> _______________________________________________
> > >>> Karlnet mailing list
> > >>> Karlnet@WISPNotes.com
> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>>
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> Karlnet mailing list
> > >>> Karlnet@WISPNotes.com
> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>>
> > >>> _______________________________________________
> > >>> Karlnet mailing list
> > >>> Karlnet@WISPNotes.com
> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>>
> > >>
> > >>_______________________________________________
> > >>Karlnet mailing list
> > >>Karlnet@WISPNotes.com
> > >>http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>
> > >>_______________________________________________
> > >>Karlnet mailing list
> > >>Karlnet@WISPNotes.com
> > >>http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> > >
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
|