I am going to call Karlnet in the morning and ask them specifically if this
issue has been corrected. I will report to the list what I am told.
Brett
----- Original Message -----
From: "Nate McLain" <nate@ctrail.net>
To: <karlnet@WISPNotes.com>
Sent: Monday, January 06, 2003 6:18 PM
Subject: RE: [Karlnet] my bridging issue
> We have seen some of this as well.
> But most of our problems went away after Bridging was disabled.
> Although I think there are some bugs with it still.
>
> Nate
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Sam Deller - Airnet NZ
> Sent: Monday, January 06, 2003 1:38 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] my bridging issue
>
>
> We had an identical issue with all of our clients. Even with bridging
turned
> off AND inhibit NAT from 802.11, the internal (private ip of the RG) would
> STILL 'leak' over to the wireless side. Our ISP bases were all in bridging
> mode.
> This was with 4.02 - Maybe this has been fixed with 4.31?
>
> In our situation, the only cure we found was to spend several days
> reconfiguring every client site (connected to the same ISP base to have
> different internal subnets. ie client A 192.168.1.x client b 192.168.2.x
> client C 192.168.3.x and so on.....
>
> This fixed all issues, but still didnt change the fact that the private IP
> was leaking. We tried this by setting up a w2k machine with multiple IP's
> (192.168.1.200, 192.168.2.200 and so on). This was connected at our NOC
and
> bridged to the ISP base. We could still ping each and every RG's internal
> address (192.168.1.254, 192.168.2.254 and so on etc...)
> We could even configure each and every RG by their so-called 'private IP
> addresss'!!
>
> -Sam
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Charles Chia Sheng Wu
> Sent: Monday, 6 January 2003 5:34 a.m.
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] my bridging issue
>
>
> yup
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Brett Hays
> Sent: Sunday, January 05, 2003 7:06 AM
> To: Karlnet List
> Subject: [Karlnet] my bridging issue
>
>
> Thanks to Charles for the answer to my configurator issue. I turned off
> bridging on all my clients and selected inhibit NAT from 802.11b interface
> as well.
>
> I am wondering if having bridging enabled on all these clients could have
> been the source of a long standing issue I have been fighting with my
> wireless clients. On clients that had an excellent signal, etc. I was
> having tiny little interruptions in service. It was only noticeable if
you
> were using Yahoo instant messenger or when downloading a file over about
> 4mb, you would get connection to the server reset messages.
>
> The interruptions were just a fraction of a second. Could this have been
ip
> conflicts from the private ip's in use behind the clients (rg1100's) since
> bridging was enabled?
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|