Larry, go back to 5/22 on this forum, and you will see a discussion on it,
starting with this post from me:
[Karlnet] Real signal strength readings on PRISM 2.5 radios
I'm using TC 4.31 and PRISM 2.5 radios. The radios have never given proper
signal strength readings. However I got the impression that if one upgraded
the firmware on the PRISM 2.5 radios, this problem disappears. I just
updated the firmware on some PRISM 2.5 radios to primary firmware v1.1.1,
and secondary firmware v1.5.6, but there is no change. Still, the local
readings are bogus.
----- Original Message -----
From: "Larry Craddock" <l_craddock@netride.net>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Friday, June 06, 2003 12:00 PM
Subject: [Karlnet] mikrotik - prism firmware upgrade
> Ok, I hate to ask this but I've looked all over and all I can find are
> references that there is new firmware. I have several of the 200mw Prism
> cards from Mikrotik with old firmware in them that do not show signal,
> noise, or snr. It's my understanding there's a new version of firware
> available that solves these problems. Could sometime tell me where to
> download the firmware and the procedure to load it ?
>
> thanks,
>
> Larry Craddock
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|