Bridging and routing works.. except that if you have both enabled, then all
TCP/IP is routed and all other protocols are bridged, AppleTalk.. etc.
Sadly for TCP/IP it seems that it is per unit and not per interface.
I too have a flashrom unit that has 2 interfaces in TC PTP mode and needs to be
bridged, but has one interface in TC PTMP mode and I would like to route to
minimize network wide broadcasts.
-----Original Message-----
From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
On Behalf Of Paul Horak
Sent: Monday, April 26, 2004 11:34 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Bridge and route on the same KN200
Anybody know if you can bridge and route on the same
radio (KN200 in this rather bizarre case :-))? If so,
please can you share the config? Turning on routing
seems to automatically deny bridging of IP traffic.
Cheers,
Paul
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|