[Karlnet] noise levels

[LaRoy McCann <lmccann@roachconveyors.com>]

Just wondering what kind of noise levels are considered 'normal' when using 
a bi-directional amplifier.

I am running between 35% and 45%.
This seems high to me, but the system was already installed when I acquired 
it and I do not have anything else using an amplifier.

The system is from speedlan.  It is a rack mount unit with two 30mw orinico 
cards.  Only one card is in use and that feeds 100ft of lmr600 into 
speedlan amp.  I think this is the fixed 500mw amp from hyperlink.  The 
other card is in the box, but is not used.  I know I should remove 2nd 
card, but just have not gotten around to doing so yet.

Thanks.


LaRoy McCann
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.532 / Virus Database: 326 - Release Date: 10/27/2003