RE: [Karlnet] RG-1100 Problems with High Powered Cards

[Michael McDermott <michael@veritech.com.au>]

We do use KN-100 boards but this customer has existing RG-1100 units that 
he would like to use.

BTW, I thought it was a power supply problem too, but it obviously wasn't. 
But thanks for your prompt response.

Regards,


At 12:53 AM 19/11/2003 -0600, you wrote:
> use the KN-100 boards?
>
> usually, it's a sign of not enough power at the RG (since the power draw of
> the prism cards is higher) - how are you powering the RG? Poe? or the wall
> wart
>
> -Charles
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Michael McDermott
> Sent: Wednesday, November 19, 2003 12:18 AM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] RG-1100 Problems with High Powered Cards
>
>
>
> I'm currently having problems with 100/200mw Senao cards in RG-1100
> devices. The RG-1100 device will not totally boot up with the 200mw card
> (freezes half way thru the boot up process), but will boot up and work with
> low power cards (Orinoco cards). Any ideas?
>
> TC firmware is SR-4200 using  knscotcn-v4.43k.bin
>
>
> Michael R McDermott BEng (Comp. Eng.), MACS, IEEE
> Pre-Sales Technical Consultant
> Veritech Australia Pty Ltd
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet

Michael R McDermott BEng (Comp. Eng.), MACS, IEEE
Pre-Sales Technical Consultant
Veritech Australia Pty Ltd
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet