Re: [Karlnet] Force reload Flash Rom

[Roger Boggs <rogerboggs@att.net>]

J3 is indeed the one.

Turn the unit off
Pull J3 shorting plug off the header
Turn the unit on
Go through the motions of File|Open File| with mac address/key
Put the J3 shorting plug back on
Reload the firmware
When unit restarts, it should be ready to go

If you forgot to put the J3 shorting plug back on the header before the
unit went through its reboot/selftest, it'll just be sitting there waiting 
for another
reload.

If you get some funny light patterns stuck on at power-up, look at the LED 
patterns link
that Kevin sent you.  That'll tell you (or at least help you figure out) 
what went wrong.

At 01:14 PM 4/29/03 -0700, you wrote:
> Jumper J3 is the magical one.  Should be on or closed for normal 
> operation, off or open for base boot mode.
>
> At 02:00 PM 4/29/2003 -0300, you wrote:
> > Hi:
> >
> >    How to "force reload" a Karlnet Flash Rom unit ?
> > There is more then 15 jumpers and I don't have any
> > clue about them...
> >
> >    Does any kind soul have any documentaion on the
> > Flash Rom units ? I saw once a page (but seems that it
> > was removed) showing several troubleshotting
> > led sequences, but could not find anymore...
> >
> > Thanks a lot,
> > Helio.

Roger Boggs