Karlnet
[Top] [All Lists]

RE: [Karlnet] Hanging COR remedy

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] Hanging COR remedy
From: "Sam Deller - Airnet NZ" <sam.deller@airnet.net.nz>
Reply-to: karlnet@WISPNotes.com
Date: Thu, 7 Nov 2002 07:54:29 +1300
List-post: <mailto:karlnet@WISPNotes.com>
Hi George
Base station is running 4.02, doing nothing but bridging.
 
Clients are RG's running (I think) 4.02, no bridging, but NATing to client PC's on the wired side.
 
I also had one client RG that hung on a regular basis - maybe this one was a bit sick I dont know... however after turning off watchdog reboot timer on this it is now cured too...
 
Sam
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On Behalf Of Bob Hrbek
Sent: Thursday, 7 November 2002 4:30 a.m.
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] Hanging COR remedy

Also, what was your config?
 
Routing/Nat/Bridging/Firewalling?
 
 
----- Original Message -----
Sent: Wednesday, November 06, 2002 9:02 AM
Subject: Re: [Karlnet] Hanging COR remedy

  Thanks for the head's-up Sam.  I will file this away just in case.
 
George
 
----- Original Message -----
Sent: Wednesday, November 06, 2002 7:35 AM
Subject: [Karlnet] Hanging COR remedy

Hello all,
Looking back through the list over the past few months it is apparent there has been 'issues' with TC ISP Bases (wavepoint II / AP-1000 or equivalent) hanging on a regular basis. We've had the same problem right from day one with our 2.4ghz system. Sometimes they lockup one card, other times both cards or the entire unit. This was happening sometimes every 2 or 3 days, however a reboot fixed it... until next time.
 
3 weeks ago we tried taking the tick out of 'enable watchdog reboot timer' - bingo!   Problem gone. we havent had to reboot once since then - touchwood....
 
Its seems ironic that this feature designed to 'cure' lockups was actually causing them !
 
I am sure every system is different, however in our case it certainly worked a treat... food for thought for anyone else out there having the same problems.
 
Regards
 
Sam Deller
Airnet NZ LTD
 
<Prev in Thread] Current Thread [Next in Thread>