well, if you're connecting to the AP w/ a standard ORiNOCO card, that means
that you're in 802.11 mode
and SR-4000 is TurboCell - you need to run TurboCell @ the AP
-Charles
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Norm Young
Sent: Wednesday, May 15, 2002 11:52 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Anyone see anything glaringly wrong here?
I've hooked my first RG/Karlnet CPE up to the network, and it doesn't work.
I can connect to the AP using an XP laptop with an Orinoco card and see the
AP the backhaul, router, and the Internet. But when I try the RG (running
SR-4000, the SOHO single NAT software) with bridging "on", Watchdog Timer
"on" all else "off" under "General Setup", I can see the AP in the TurboCell
Station Entries, can do a link test, but nada else. Can't ping the AP or
the backhaul (but can ping the CPE). For the moment, I'm bridging all
protocols on the AP, and like I said, it seems to work fine with the laptop,
but go to the RG (which is setup the same as my backhaul---and the backhaul
works fine) and nothing.
Any ideas?
Norm
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|