I have used a Shuttle Spacewalker motherboard with a flashrom unit and they
have a built in speaker and it clicks when data is being transferred.
I think it would be awesome to be able to align the antenna using the
speaker. Although it might be kinda tough to do that with more then one RF
interface in use.
Nate
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Kevin Knuth
Sent: Wednesday, March 12, 2003 9:30 PM
To: Karlnet Mailing List
Subject: RE: [Karlnet] Intro - Board Specs
All,
As I understand it, the speaker function has NOT yet been activated in the
software!
Kevin
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Caleb Carroll
Sent: Wednesday, March 12, 2003 7:04 PM
To: Karlnet Mailing List
Subject: RE: [Karlnet] Intro - Board Specs
Doesn't make any sound when I run a link test. It squeals for a split
second evey time power is plugged in or removed.
*********** REPLY SEPARATOR ***********
On 2003-Mar-12 at 4:41 PM Dan Metcalf wrote:
>How is the "speaker" on it, does it work for link tests?
>
>Dan Metcalf
>Wireless Broadband Systems
>http://www.wbsysnet.com/
>781-577-2780
>dan.metcalf@wbsysnet.com
>
>
>> -----Original Message-----
>> From: karlnet-bounces@WISPNotes.com
>[mailto:karlnet-bounces@WISPNotes.com]
>> On Behalf Of Bob Hrbek
>> Sent: Wednesday, March 12, 2003 4:18 PM
>> To: Karlnet Mailing List
>> Subject: Re: [Karlnet] Intro - Board Specs
>>
>> I got one also. Just looked it over last night. Anybody know if you
>can
>> get a console on this thing and boot it off a CF card? Just a
>thought.
>>
>> -bob
>> ----- Original Message -----
>> From: "Caleb Carroll" <karlnet@pathcom.ca>
>> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
>> Sent: Wednesday, March 12, 2003 3:09 PM
>> Subject: RE: [Karlnet] Intro - Board Specs
>>
>>
>> > I just recieved the new boards and tried 802.11b compatible access
>point
>> mode.
>> >
>> > It doesn't work with Prism 2.5 cards.
>> >
>> > Works with Orinoco Gold, Avaya Gold, Avaya Silver.
>> >
>> > *********** REPLY SEPARATOR ***********
>> >
>> > On 2003-Mar-08 at 8:51 PM Charles Chia Sheng Wu wrote:
>> >
>> > >well...we haven't had any luck w/ the prism 2.0 - waiting for the
>prism
>> > >2.5
>> > >cards to come in
>> > >
>> > >-Charles
>> > >
>> > >-----Original Message-----
>> > >From: karlnet-bounces@WISPNotes.com
>> > >[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Caleb Carroll
>> > >Sent: Saturday, March 08, 2003 6:24 PM
>> > >To: Karlnet Mailing List
>> > >Subject: RE: [Karlnet] Intro - Board Specs
>> > >
>> > >
>> > >Charles, Are you ever going to tell us if the new boards work in
>> 802.11b
>> > >mode with Prism 2.5 cards or are you going to keep that secret to
>> yourself?
>> > >
>> > >*********** REPLY SEPARATOR ***********
>> > >
>> > >On 2003-Mar-08 at 1:33 PM Charles Chia Sheng Wu wrote:
>> > >
>> > >>ok...
>> > >>
>> > >>after a brief recall false alarm (KarlNet issue), boards are
>shipping
>> > >again
>> > >>and everyone is happy
>> > >>
>> > >>Pricing is as follows
>> > >>
>> > >>1 Port Boards:
>> > >>
>> > >>Q1-9: $150
>> > >>Q10-29: $145
>> > >>Q30-49: $140
>> > >>Q50+: Offlist
>> > >>
>> > >>2 Port Boards:
>> > >>
>> > >>Q1-9: $185
>> > >>Q10-29: $177.50
>> > >>Q30-49: $172
>> > >>Q50+: Offlist
>> > >>
>> > >>Also...there are even better deals if you buy software w/ the
>board
>> > >>
>> > >>-Charles
>> > >>
>> > >>-----Original Message-----
>> > >>From: karlnet-bounces@WISPNotes.com
>> > >>[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Bill Fisher
>> > >>Sent: Saturday, March 08, 2003 10:42 AM
>> > >>To: Karlnet Mailing List
>> > >>Subject: Re: [Karlnet] Intro - Board Specs
>> > >>
>> > >>
>> > >>
>> > >>Charles there are no List-Nazi's here. Feel free to post your
>pricing
>> if
>> > >>you like.
>> > >>
>> > >>Bill Fisher
>> > >>
>> > >>
>> > >>
>> > >>----- Original Message -----
>> > >>From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
>> > >>To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
>> > >>Sent: Sunday, March 02, 2003 11:10 PM
>> > >>Subject: RE: [Karlnet] Intro - Board Specs
>> > >>
>> > >>
>> > >>> yes - offlist (we shipped our first boards on Thursday)
>> > >>>
>> > >>> -Charles
>> > >>>
>> > >>> -----Original Message-----
>> > >>> From: karlnet-bounces@WISPNotes.com
>> > >>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Nate McLain
>> > >>> Sent: Sunday, March 02, 2003 10:01 PM
>> > >>> To: Karlnet Mailing List
>> > >>> Subject: RE: [Karlnet] Intro - Board Specs
>> > >>>
>> > >>>
>> > >>> Charles,
>> > >>>
>> > >>> Do you have these in stock currently??
>> > >>> If so I'm ready to order a few.
>> > >>>
>> > >>> Nate
>> > >>>
>> > >>> -----Original Message-----
>> > >>> From: karlnet-bounces@WISPNotes.com
>> > >>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Charles Chia
>> Sheng
>> Wu
>> > >>> Sent: Sunday, March 02, 2003 8:51 PM
>> > >>> To: Karlnet Mailing List
>> > >>> Subject: RE: [Karlnet] Intro - Board Specs
>> > >>>
>> > >>>
>> > >>> Full Version WPAP+ / WPBASE+
>> > >>> SPECIFICATIONS
>> > >>> CPU ST-PC Elite @ 133MHz
>> > >>> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
>> > >>> RAM 16MB on-board DRAM for programs and data.
>> > >>> Storage 512KB on-board Flash ROM (BIOS and
>> > >>> KarlNet firmware); Linear Flash support for factory loading.
>> > >>> Data Interface
>> > >>> PCMCIA / CARDBUS sockets
>> > >>> 3.3/5V Selectable operations
>> > >>> 10/100mbps Auto-sense Fast Ethernet
>> > >>> Power Input 9V to 15V DC in, either from the Input Jack, or
>Power
>> over
>> > >>> Ethernet input from the RJ45 port supports the proposed IEEE
>802.3af
>> PoE
>> > >>> Standard. Power consumption ~9W fully loaded.
>> > >>> Second Ethernet port may be used as a PoE injector when DC power
>is
>> > >>applied
>> > >>> to first Ethernet Port.
>> > >>> Additional Features
>> > >>> Fully Industrial Strength Chipset
>> > >>> Reset / Reload Pushbutton Switches,
>> > >>> Hardware Watchdog Timer,
>> > >>> Programmable GPIO register for Input/Output,
>> > >>> FCC Class A Certification
>> > >>> Compact Flash Socket for Future Upgrades
>> > >>> Piezo Buzzer
>> > >>> Software control for header for external fan (voltage supply, 5
>volt
>> /
>> 1
>> > >>AMP
>> > >>> or sync current)
>> > >>> Speaker output header
>> > >>> LEDs for Board Power status, Link/ Activity for Ethernets & Link
>/
>> > >>Activity
>> > >>> for PCMCIA / Cardbus sockets
>> > >>> Form Factor 3.8" x 5.2" x 1.1" basic board size, with dual-side
>> major
>> > >>> component placement, the same basic mounting holes as the
>RG-1000.
>> > >>> Operating Temperature
>> > >>> -30° to 55° Celsius (° to 131° Fahrenheit) predicted
>temperature
>> range,
>> > >>> with non-condensing humidity.
>> > >>>
>> > >>> Lower cost Version WPCPE+
>> > >>> SPECIFICATIONS
>> > >>> CPU ST-PC Elite @ 133MHz
>> > >>> BIOS KarlNet Optimized, PC-compatible, in Flash ROM.
>> > >>> RAM 16MB on-board DRAM for programs and data.
>> > >>> Storage 512KB on-board Flash ROM (BIOS and
>> > >>> KarlNet firmware); Linear Flash support for factory loading.
>> Compact
>> > >>Flash
>> > >>> socket for future software upgrades.
>> > >>> Data Interface
>> > >>> PCMCIA / CARDBUS sockets
>> > >>> 3.3/5V Selectable operations
>> > >>> 10/100mbps Auto-sense Fast Ethernet
>> > >>> Power Input 9V to 15V DC in, either from the Input Jack, or
>Power
>> over
>> > >>> Ethernet input from the RJ45 port supports the proposed IEEE
>802.3af
>> PoE
>> > >>> Standard. Power consumption ~9W fully loaded.
>> > >>> Additional Features
>> > >>> Fully Industrial rated Chipset
>> > >>> Reset / Reload Pushbutton Switches,
>> > >>> Hardware Watchdog Timer,
>> > >>> Programmable GPIO register for Input/Output,
>> > >>> FCC Class A Certification
>> > >>> Compact Flash Socket for Future Upgrades
>> > >>> Piezo Buzzer
>> > >>> Software control for header for external fan (voltage supply, 5
>volt
>> /
>> 1
>> > >>AMP
>> > >>> or sync current)
>> > >>> Speaker output header
>> > >>> LEDs for Board Power status, Link/ Activity for Ethernets & Link
>/
>> > >>Activity
>> > >>> for PCMCIA / Cardbus sockets
>> > >>> Form Factor 3.8" x 5.2" x .9" basic board size, with dual-side
>major
>> > >>> component placement, the same basic mounting holes as the
>RG-1000.
>> > >>> Operating Temperature
>> > >>> -30° to 55° Celsius (-22° to 131° Fahrenheit) predicted
>temperature
>> > >>range,
>> > >>> with non-condensing humidity.
>> > >>>
>> > >>>
>> > >>> -----Original Message-----
>> > >>> From: karlnet-bounces@WISPNotes.com
>> > >>> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of George Minich
>> > >>> Sent: Sunday, March 02, 2003 7:54 PM
>> > >>> To: Karlnet Mailing List
>> > >>> Subject: Re: [Karlnet] Intro
>> > >>>
>> > >>>
>> > >>> Please post all hardware and pricing.
>> > >>>
>> > >>> Thanks
>> > >>>
>> > >>> George
>> > >>>
>> > >>> ----- Original Message -----
>> > >>> From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
>> > >>> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
>> > >>> Sent: Sunday, March 02, 2003 8:47 PM
>> > >>> Subject: RE: [Karlnet] Intro
>> > >>>
>> > >>>
>> > >>> > >Hi All,
>> > >>> >
>> > >>> > Hi Caleb
>> > >>> >
>> > >>> > >I've been using Karlnet for about a year and I only just now
>> stumbled
>> > >>> > accross this mailing list. I've been going through
>> > >>> > >the past threads looking for some of the problems I've
>> experienced.
>> > >>> >
>> > >>> > that's good
>> > >>> >
>> > >>> > >I've seen a few posts regarding Karlnet's "support" for
>Linux.
>> If
>> > >>anyone
>> > >>> > is looking for help with the Linux drivers, pay a
>> > >>> > >visit to my FTP site. You will find RPM's and documentation
>for
>> > >>getting
>> > >>> > the Linux TurboCell drivers working.
>> > >>> > >ftp://ftp.pathcom.ca/i-Path/TurboCell/Linux
>> > >>> >
>> > >>> > >About me.. I'm managing a small WISP west of Calgary,
>Alberta,
>> > >Canada.
>> > >>> The
>> > >>> > company I work for, Pathcom Wireless Inc.,
>> > >>> > >provides high-speed internet service in an area of roughly
>1000
>> > >square
>> > >>> > miles using 13 base stations (Karlnet SA-4400 on AP-
>> > >>> > >1000). Backhaul from each base station to our fiber gateway
>is
>> via
>> > >>> various
>> > >>> > high-bandwidth radios.
>> > >>> >
>> > >>> > cool
>> > >>> >
>> > >>> > >I've been using high-power, 23dBm Prism 2.5 based PC Cards
>> > >sucessfully
>> > >>in
>> > >>> > RG-1100's and AP-1000's for a few months now with
>> > >>> > >only one problem that re-occured a couple of times:
>overheating.
>> The
>> > >>two
>> > >>> > brands that I've used are: Zcomax XI-325HP
>> > >>> > >(Expensive, $179!), Netgate (re-branded Senao) NL-2511CD Plus
>> Ext2
>> > >>($95
>> > >>> > from www.netgate.com)
>> > >>> >
>> > >>> > that's why you need the new KarlNet board - just released, but
>> built
>> > >to
>> > >>> > withstand the greater power draw of the prism cards
>> > >>> >
>> > >>> > >What I could use some help with:
>> > >>> >
>> > >>> > >- I was trying to set up a Wi-fi hotspot and wanted to use a
>high
>> > >>power
>> > >>> > card. I was shocked when I discovered that although >the
>AP-1000
>> with
>> > >>one
>> > >>> > of the Netgate cards operates flawlessly when setup as a
>TurboCell
>> > >base
>> > >>> > station, the AP-1000 will not
>> > >>> > >finish booting when it is set up as an 802.11b compatible
>access
>> > >>point!
>> > >>> >
>> > >>> > You need the new 2 card slot, 2 port KarlNet board - retails
>for
>> $185
>> > >-
>> > >>> > check the archives for more details (or I can post em again if
>> people
>> > >>want
>> > >>> > to see em)
>> > >>> >
>> > >>> > >So far, I've tried to work around the problem by:
>> > >>> > >- Flashing the Netgate card with 4 different versions of the
>base
>> &
>> > >>> station
>> > >>> > functions firmware from Intersil.
>> > >>> > >- Trying to use one of the Zcomax cards in 802.11b access
>point
>> mode.
>> > >>> (same
>> > >>> > problem, AP-1000 will not finish booting)
>> > >>> >
>> > >>> > do you have 2 cards in your AP-1000? if so, which cards?
>> > >>> >
>> > >>> > >Anyone have experience with using Prism 2.5 based cards in
>> 802.11b
>> > >>mode?
>> > >>> > According to Karlnet release notes for v4.31
>> > >>> > >firmware, Intersil Prism 2.5 based cards are supposed to work
>in
>> both
>> > >>> > TurboCell and 802.11 mode. See:
>> > >>> >
>> > >>>
>> >
>>
>>>>http://www.karlnet.com/Documents/ReleaseNotes/Software%20Release%20ve
>rs
>> io
>> n
>> > >%
>> > >>> > 204.31.htm#_Toc32119586
>> > >>> >
>> > >>> > IMO, it's probably not a firmware issue, rather, if you have 2
>> cards
>> > >>> loaded
>> > >>> > in the AP-1000, it's a power draw issue
>> > >>> >
>> > >>> > -Charles
>> > >>> >
>> > >>> > _______________________________________________
>> > >>> > Karlnet mailing list
>> > >>> > Karlnet@WISPNotes.com
>> > >>> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >>> >
>> > >>> >
>> > >>>
>> > >>> _______________________________________________
>> > >>> Karlnet mailing list
>> > >>> Karlnet@WISPNotes.com
>> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >>>
>> > >>> _______________________________________________
>> > >>> Karlnet mailing list
>> > >>> Karlnet@WISPNotes.com
>> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >>>
>> > >>>
>> > >>>
>> > >>> _______________________________________________
>> > >>> Karlnet mailing list
>> > >>> Karlnet@WISPNotes.com
>> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >>>
>> > >>> _______________________________________________
>> > >>> Karlnet mailing list
>> > >>> Karlnet@WISPNotes.com
>> > >>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >>>
>> > >>
>> > >>_______________________________________________
>> > >>Karlnet mailing list
>> > >>Karlnet@WISPNotes.com
>> > >>http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >>
>> > >>_______________________________________________
>> > >>Karlnet mailing list
>> > >>Karlnet@WISPNotes.com
>> > >>http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >
>> > >
>> > >
>> > >
>> > >_______________________________________________
>> > >Karlnet mailing list
>> > >Karlnet@WISPNotes.com
>> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
>> > >
>> > >_______________________________________________
>> > >Karlnet mailing list
>> > >Karlnet@WISPNotes.com
>> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > Karlnet mailing list
>> > Karlnet@WISPNotes.com
>> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>> >
>>
>> _______________________________________________
>> Karlnet mailing list
>> Karlnet@WISPNotes.com
>> http://lists.wispnotes.com/mailman/listinfo/karlnet
>> ---
>> [This E-mail scanned for viruses by Declude Virus]
>
>
>---
>[This E-mail scanned for viruses by Declude Virus]
>
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|