After spending many hours trying to solve the problem, I
decided to take my old 486SX off the shelf and put it back
into service. After a little time of getting the COM ports
and IRQ's set up correctly, all is now working. Must have
been something in my Pentium that I will probably never
figure out :-(
Scott K8DX
-----Original Message-----
From: Scott Detloff K8DX +ADw-ni8l+AEA-raex.com+AD4-
To: na-user+AEA-contesting.com +ADw-na-user+AEA-contesting.com+AD4-
To: <na-user@contesting.com>
Date: Wednesday, October 18, 2000 12:15 AM
Subject: +AFs-na-user+AF0- SO2R switching problem
+AD4-
+AD4-I made the SO2R box that is in the NA manual a few weeks ago.
+AD4-Since one on my 'MP's was at Yaesu for service, this is the first time
+AD4-I've checked to make sure everything is working.
+AD4-
+AD4-Everything seems to switch OK on CW, but on SSB I'm having some
+AD4-problems. Radio 1 works fine. When you go to Radio 2, Ctrl S and
+AD4-Alt-D work fine, but once the radio is swapped with Ctrl-R, it stays
+AD4-there and the computer hangs.
+AD4-
+AD4-I've checked for TSR problems and can't find any. I've looked at possible
+AD4-IRQ conflicts too with no luck. I even tried using another DVP board
+AD4-without any success.
+AD4-
+AD4-Any other ideas on what to try?
+AD4-
+AD4-Scott K8DX
+AD4-
+AD4-
+AD4-
+AD4---
+AD4-Submissions: na-user+AEA-contesting.com
+AD4-Administrative requests: na-user-REQUEST+AEA-contesting.com
+AD4-WWW: http://datom.contesting.com/
+AD4-Questions: owner-na-user+AEA-contesting.com
+AD4-
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://datom.contesting.com/
Questions: owner-na-user@contesting.com
|