Bill, if you are using Logger32, they know about the problem and have fixed
it for next beta release.
In the mean time, go through your adi.bad file and change <time_on:4> to
<time_on:6>. Then go through and add "30" or some number between 01 and 59 to
act
as a different time. i.e. 2356 becomes 235630.
I had problem with this going to eQSL and to LOTW but this fixed it.
Another problem may be the <eor> which in NA gets exported as part of the
<comment> into Logger32. Then when you try to upload to LOTW or eQSL, it won't
work because it sees two <eor>s neither of which represents a complete QSO.
After you export from Logger32, you need to strip that first <eor> out of the
record. I did it by replacing <eor> with 0 as Logger 32's <EOR> is
capitalized.
Check that option in "notepad"
If you are not using Logger32, at least the above fix may help with the time
problem.
Good Luck, 73, Doug W3HDH
_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web: http://www.datomonline.com/
|