Bob,
Can you try another port on the same computer?
The most likely cause is hardware failure on the port. Sometimes, it
doesn't take a lightning hit to do damage.
We fired up for Michigan QSO Party back in mid-April with our usual
multi-multi setup, but this time the computer being used on 40 SSB would
not function to pass QSOs around the network. Worked fine for five
years, not sure why the COM port took a dump...
Dave
Robert Pack, NX5M wrote:
> Also, I have used 4 different interfaces from my other operating positions
> and every one of them does the same thing so it is not the interface.
> F-keys work
> Alt-K works
> 1/2 of the paddle works
>
> Bob is stumped.
>
>
> ----- Original Message -----
> From: "Robert Pack, NX5M" <nx5m@txcyber.com>
> To: <NA-User@contesting.com>
> Sent: Thursday, May 22, 2008 7:44 PM
> Subject: [NA-User] keying problem
>
>
>
>> Last time I used it was February and all was well.
>> Using latest version.
>> Everything from the keyboard send but only one side of the paddles will
>> work.
>> Tested different paddles, tested existing cable....can find no issues.
>>
>> Any ideas?
>> This is a great time to have a problem right before wpx.
>>
>>
>>
>> 73,
>> Bob NX5M
>> _______________________________________________
>> NA-User mailing list
>> NA-User@contesting.com
>> http://lists.contesting.com/mailman/listinfo/na-user
>> NA on the web: http://www.datomonline.com/
>>
>>
>
> _______________________________________________
> NA-User mailing list
> NA-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/na-user
> NA on the web: http://www.datomonline.com/
>
>
>
_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web: http://www.datomonline.com/
|