NA-User
[Top] [All Lists]

Re: [NA-User] ICOM 738

To: James Rogers <jdrog@bellsouth.net>
Subject: Re: [NA-User] ICOM 738
From: David Pruett <k8cc@comcast.net>
Date: Thu, 21 Jan 2010 19:39:52 -0500
List-post: <na-user@contesting.com">mailto:na-user@contesting.com>
Jim,

Here are some suggestions:

    * A COM port (whether 25 or 9 pins) always has FEMALE pins on the
      computer's connector.  If the connector has male pins, it's an LPT.
    * COM port cables come in two varieties: 1) straight thru, or 2)
      null-modem.  The latter has the TX and RX data lines reversed. 
      I'm assuming your're using a CT-17 Level converter between the COM
      port cable and the radio.  You have to have the correct cable or
      it won't work.  Straight thru cables usually have a male connector
      on one end and a female connector on the other end.  Null modem
      cables usually have female connectors on both ends.  But there are
      exceptions to this - the FT-1000MP requires a straight thru cable
      with female connectors on each end, and amazingly enough, Radio
      Shack sells such a cable.
    * If your IC-738 is used, you should check what CI-V address it's
      set for.  The default value is supposed to be 44Hex, which is what
      NA is coded to work with.  The procedure for checking/setting this
      value varies between Icom models.  Check your manual.
    * Get one of those little COM port tester thingies.  Stick it on the
      computer's COM port and you should see the TXD blink roughly every
      second.  If it isn't, you have a COM port problem or NA is not
      correctly set up to talk to that COM port.
    * What COM port number, COM port address and COM port IRQ settings
      are you using?
    * Has the COM port worked with any other programs?

Hopefully, this helps.

73, Dave/K8CC

James Rogers wrote:
> Folks,
>
> I have an ICOM 738 that I can not seem to get talking to NA.  CW is  
> working fine from Com port 1.
>
> My CT-17 Icom interface goes to a 25pin connector on the computer. Is  
> this Com port 2 or an LPT port?
>
> Any help would be appreciated.
>
> Jim N4du
> _______________________________________________
> NA-User mailing list
> NA-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/na-user
> NA on the web:  http://www.datomonline.com/
>
>   

_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web:  http://www.datomonline.com/

<Prev in Thread] Current Thread [Next in Thread>