Hi Duane,
Yes, this setting seems be standard.
But the problem occures when ORION drive/control the PA:
I'am using ORION for drive the YAESU QUADRA Solid State PA.
The Band Data Output 1 drive the QUADRA (thru an interface).
The problem is, when displayed frequencies
are in different bands. The Band Data Output respect not
the upper displayed frequency and the QUADRA is not switched to desired
band.
You must set both frequencies manual to desired band.
If not the PA is set to the lower displayed frequency/band.
When click the DX spot I need to set DX4WIN
for control both displayed frequencies, not only the upper.
When I'am using DX4WIN with YAESU QUADRA and YAESU MARK-V FT1000 MP,
everything works fine.
73 Milan, OK1FM
P.S. An other problem is that ORION has no ALC input control
from PA for reduce output power (overdriving, high SWR protection etc.)
>-----Original Message-----
>From: Duane A Calvin [mailto:ac5aa@juno.com]
>Sent: Monday, March 07, 2005 6:20 AM
>To: ok1fm@ges.cz; orion@contesting.com
>Subject: Re: [Orion] Orion 565 with DX4WIN
>
>
>Hello Milan,
> I'm using DX4WIN with my Orion. It works properly, as you note.
>If the DX station is working simplex, then your rig will be set with VFO
>A on his freq, and both RX and TX assigned to it. This should be
>correct, and it is how every other rig I've had gets set for simplex. If
>he is working offset, and the spot indicates it, DX4WIN will set VFO A to
>his frequency, and will set VFO B to his QSX, as well as switching the TX
>to VFO B. So, I think what you are describing matches what I have just
>described, and it's the normal setup for each condition. Let us know how
>you think it should be different, in case I'm missing something.
>
> 73, Duane
>
>
>On Mon, 7 Mar 2005 00:46:44 +0100
>=?windows-1250?Q?Milan_G=FCtter=2C_OK1FM?= <ok1fm@ges.cz> writes:
>> Hi OMs,
>>
>> Who is using TEN-TEC ORION 565AT (ORION 565)
>> controlled by DX4WIN6.04 ?
>>
>> I need to know how set the DX4WIN Radio Database
>> that both displayed frequencies at ORION
>> (A and B) change when click on a DX spot.
>>
>> At present, when click on a DX4WIN DX spot,
>> only the upper ORION (A) frequency goes
>> to the DX spot frequency.
>>
>> The lower frequency (B) stay at previous QRG.
>> (When a QSX is given by DX spot, the lower
>> (B) display works right, the right QSX frequency is set)
>>
>> Who can help?
>>
>> 73 Milan, OK1FM
>> ok1fm@ges.cz
>>
>>
>>
>>
>>
>
>
>--------------------------------------
>Duane Calvin, AC5AA
>Austin, Texas
>
>http://home.austin.rr.com/ac5aa
>--
>Příchozí zpráva neobsahuje viry.
>Zkontrolováno Antivirovým systémem AVG.
>Verze: 7.0.308 / Virová báze: 266.6.2 - datum vydání: 4.3.2005
>
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|