Hi,
I would recommend a loop, and use the null, not the peak... Much
simpler to get your headings that way. See:
http://nk7z.net/i-have-rfi-now-what-locating-it/
in that page, I covered how I did my beam headings etc., using a loop.
Hope it helps.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Mon, 2015-12-21 at 15:18 -0500, Jim Miller wrote:
> I have a 10db increase in noise on 6 meters to the east as compared to my
> west. This obviously isn't good when trying to work EU terrestrially or via
> EME at moonrise. I have already completed a full house power down test with
> no change noted.
>
> I have the bits needed for a portable bandscope and a Tecsun PL-660 to
> employ in a 6M RFI hunt but I'd like some suggestions for a directional 6m
> antenna. My initial attempt at locating the source will be from my car as
> it is easier to carry all the stuff for the band scope in particular vs
> walking. I figure once I get closer the PL660 will be my walkabout device.
> It may also be useful by itself with a directional antenna.
>
> I'm not sure on 6m a yagi would be useful due to the size so I wonder what
> others use? Perhaps a loop? Although bidirectional I could still
> triangulate on the source.
>
> I know the suggested bands for finding power line noise are higher up and
> the Tecsun will help but for now I'd like to start where I know I have the
> problem, i.e. 6m. I don't have 2m capability here in the shack or on my
> rotator.
>
> Thanks!
>
> jim ab3cv
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|