RFI
[Top] [All Lists]

Re: [RFI] RFI Direction Finding

To: "'Jim P'" <jvpoll@dallas.net>,"'Paul Christensen'" <w9ac@arrl.net>, <rfi@contesting.com>
Subject: Re: [RFI] RFI Direction Finding
From: "Ed -K0iL" <eedwards@tconl.com>
Date: Sat, 18 Feb 2006 08:33:49 -0600
List-post: <mailto:rfi@contesting.com>
No, it does not make that assumption at all.  Not sure where you got that
from.

It makes the assumption that the noise travels FARTHER from the source on
lower freqs than at higher freqs. You must be close to the source to get it
at VHF and closer still to pick it up on UHF.  

73,
 de ed -K0iL

-----Original Message-----
From: Jim P [mailto:jvpoll@dallas.net] 

----- Original Message -----
From: "Ed -K0iL" <eedwards@tconl.com>
> The fact that you cannot rcv it at VHF indicates the source is some
distance
> away from your station.  It's either being conducted via lines to your

This assumes that the source is flat from HF through VHF. This isn't
always the case.

> vicinity or it's just far enough away to be out-of-range on VHF but not on
> HF.




_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>