I think what Tom is saying is if you change the impedance of a
common-mode "Circuit" by adding an RF choke to the cable entrance,
current no longer flows at all so it doesn't have to go anywhere since
it no longer exists!
The Common mode"circuit" without the choke has currents only because of
it's characteristic impedance without the choke; change that impedance
by adding the choke and the currents simply vanish. No shunting needed.
If you place the choke on the AC mains ground you WILL create a change
of that circuit's characteristic impedance and it will no longer
function as the AC safety ground whenever you need it. You also violate
the single point grounding principle since that circuit now sees other
grounds as lower impedances (like thru your equipment circuit boards or
through humans in some cases).
73, de ed -K0iL
-----Original Message-----
From: rfi-bounces@contesting.com On Behalf Of Tom Rauch
The real cure is to stop it at the entrance to the shack,
not the power line exit!!!
<p class=MsoNormal><span style='font-size:8.5pt'>This e-mail contains Omaha
Public Power District's confidential and proprietary information and is for use
only by the intended recipient. Unless explicitly stated otherwise, this
e-mail is not a contract offer, amendment, nor acceptance. If you are not the
intended recipient you are notified that disclosing, copying, distributing or
taking any action in reliance on the contents of this information is strictly
prohibited.</p>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|