How is the toroid installed on the AC power cord and what type is it?
How does he get his TV signal into the TV?
If you are, in fact, getting directly into the internal wiring of the
TV you may have to line the case with sheets of stick-on aluminum foil.
My guess is, at that distance and on that frequency, the TV signal
source (cable, satellite, or antenna), or the AC line.
> When TX on 80m, my neighbors' Samsung LCD TV will turn on, off, the
> volume will randomly change and channels will change. It uses an IR
> remote. so far we have done the following:
>
> 1. removed batteries from the remote. No change. 2. removed ALL AV
> and HDMI cables from the unit....only connection is power cord....no
> change. 3. Ferrite torroid on power cord...still no change...channels
> and volume etc. still change when tx. 4. so far the problem seems
> isolated to 80m....40 and up don't seem to be an issue.
>
> I seems as though the RF is entering the TV directly and effecting
> the remote control circuitry. This is a very unusual problem, since I
> have always been able to solve an RFI problem with torroids on the
> cables to the unit, but in this case, the unit seems affected when
> isolated. I am at a loss what I should try next. Anyone found a
> solution to this problem?
>
> de steve ve6wz.
--
Thanks! & 73, KD4E
David Colburn http://kd4e.com
Have an http://ultrafidian.com day
I don't google I SEARCH! http://yippy.com
Shop Freedom-Friendly http://kd4e.com/of.html
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|