RFI
[Top] [All Lists]

[RFI] Low Pass TVI Filters FS

To: RFI at contesting <RFI@contesting.com>
Subject: [RFI] Low Pass TVI Filters FS
From: "Ken Simpson, W8EK" <W8EK@flham.net>
Date: Mon, 19 Mar 2012 12:24:39 -0400
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Low Pass TVI Filters For Sale:

A low pass TVI filter is added to the transmitter to reduce
harmonic interference. All have SO-239 connectors, are 50
ohm filters, and are rated to take full legal power.

Bud LF-601 low pass filter
This filter is adjustable for best attenuation in your particular
situation, and also to more closely match your specific impedance.
It cuts off at about 52 MHz (if adjusted as such) so it can be
used on 6 meters, and will handle 1500 watts. $35

Bencher YA-1, high power, low pass TVI filter
If you need a heavy duty filter for the output of your amplifier,
this one is ideal. It will take full legal power plus, and has at
least 80 db signal attenuation at TV channel 2. This one works
great, and is in its original box.
Bencher currently sells these for about $90. Only $60.

Bencher YA-1
As above, but not in original box. $45

Drake TV-1000-LP Low pass TVI filter
This is the filter that may also be used on the low end of six
meters, as well as HF. It is good for 1000 W "average" below
30MHz, and about 200 W up to 52 MHz. With paper work for $30.

Drake TV-1000
LP Filter as above, which functions fine electrically, but looks
ugly. With paper work. $25

Drake TV-3300-LP Low Pass Filter
This modern low pass filter has been optimized to have more
attenuation in the 40 MHz region, where many TVs have their
IF. It is good for 1000 Watts "average" according to the manual,
and has over 80 db attenuation at 41 MHz. This one looks great,
and includes the paper work. $30

B & W FL-10/1500
This filter cuts off just above 10 meters, and handles 1500
Watts. It is the latest model B&W filter.In very nice condition,
it looks close to new. $40.

Johnson 250-20 Low Pass Filter
This is a 52 ohm cylindrical low pass filter with a cut
off frequency of 45 MHz and 75 db of attenuation.
It is rated to take 1000 Watts of AM, or 5000 Watts
PEP SSB. With mounting bracket. $30

Para Dynamics PDC 1089
This filter is rated at a full Kilowatt, up to 30 MHz.
5 x 6 x 2 inch black box, instead of the more familiar long
enclosure. It looks like new. $25


Powerstat (Variac) Variable Autotransformer:

We all call these Variacs, but this one is made by Powerstat.
It is their model 21, rated at 3.75 amps, 530 va, up to 140
volts AC.

This one is housed in a nice grey hammertone box, with a line
cord in, power switch, and binding posts for output. Of course
it also has the large (about 5 inch) knob, with the graduated
scale on it.

This would be ideal for bringing some of the older rigs up
to power slowly.

This one is in very nice condition, for $40 plus shipping
from Florida. It would ship in a postal service "flat rate
box."


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400





_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>