You have found legitimate reasons for improper power.
We have a station in Fort Collins, Colorado, KCOL on 600 kHz that routinely
refuses to reduce power as they should during prescribed night time hours.
I have called them on it several times, but it still repeats. Excuses are
usually given. I measure their strength in dBm with good HP equipment and
a fixed small shielded loop over the time they should transition from day
to night time power levels. Even several hours after they should be on
night time power, they are still just as strong at my QTH as they are
during the day. Does FCC care?
Dave - WØLEV
On Wed, Oct 27, 2021 at 3:53 PM Gary Peterson <kzerocx@rap.midco.net> wrote:
> Don,
>
> This could be one of the rare instances that a sudden change occurred in
> the radio station’s transmitting system. Rare, but not unheard of.
>
> I find it interesting that you mentioned that the station’s output power
> far exceeded measurements, made 2 weeks prior, during the annual
> inspection. Is it possible that the station was running at some level of
> reduced power at the time that the NRSC 2 measurements were performed?
> Before I measure any AM station, I ensure that the station is operating at
> licensed power. I either talk directly to their engineer, check their
> remote control readings or actually enter the transmitter building. Once,
> I found an AM station running night power during the day. Apparently, a
> power bump killed the clock in the remote control system. The UPS battery
> had failed, causing the clock to zero the date and time. This probably
> happened at night and left the station stalled on night power. Just a
> couple of months ago, I measured a local AM station that was not in
> compliance with occupied bandwidth measurements. I checked the same
> station at night, to see if the problem existed when they should have been
> at night, reduced power. They were at full power, two hours after local
> sunset. Same situation. Power bump with failed UPS resulting in station
> staying at full power, 24 hours per day. Who knows how long this had been
> going on.
>
> I never cease to be surprised at what I sometimes encounter. My favorite
> saying about many broadcast stations is that the lights may be on, but
> nobody’s home.
>
> Gary
> KzeroCX
>
>
> Funny that you bring this up (annual inspection). It just so happens that
> WNTS had just gone through their annual inspection (measurements) 2 weeks
> prior to the splatter showing up and I saw the paper work documenting the
> inspection, and I know for a fact that I could not hear the splatter 10
> days prior to the splatter occurring when I was down in the area of the
> transmitter site and when I heard the splatter 10 days later it was very
> strong. We also noticed something odd when I went to the transmitter site
> with their engineers to determine the problem as the transmitter output
> power far exceeded the measurements that were made 2 weeks prior during the
> annual inspection so it did indeed appear the issue was not a gradual
> issue, but more of a sudden failure.
>
> Just FYI,
> Don (wd8dsb)
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
--
*Dave - WØLEV*
*Just Let Darwin Work*
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|