On Thu, 10 Apr 2014, Jim Brown wrote:
On 4/10/2014 10:40 AM, Hisashi T Fujinaka wrote:
The crowbar circuit trips on RF a lot. I've seen this on several
Astrons I own. Lots of ferrite on the leads helps.
What frequencies? When you say "lots of ferrites," did you wind turns
through them, or just clamp them on?
I've had issues on 40 and 15, and I think on 30. Definitely on 40,
though with a couple of different radios.
The power line I clamped on several (my supply of ferrite is just Radio
Shack and those aren't big enough) but I did use several turns on the
power supply leads near the power supply at first and then near the
radio as well when I had other issues.
--
Hisashi T Fujinaka - htodd@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|