Here's another quirk.
Of the two PC's I'm having trouble with 1 & 4, when I go to "View workgroup
computers" from Network Places, both show the other
computer, but still no access. So they appear to know the other is in the same
workgroup. Just getting the usual "\\xxxx is not
accessible. You might now have permission to use this network resource.
Contact the administrator of this server to find out if you
have access permissions.
The network path was not found."
I've received a few direct replies already. Thanks!
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Don Hill AA5AU
Sent: Friday, January 25, 2008 9:42 PM
To: 'RTTY'
Subject: [RTTY] Need some networking help
I sent this to the WriteLog reflector but it hasn't made it through. Hopefully
someone here on RTTY can help.
Not directly related to RTTY, but I'm trying to set up my laptop on my network
so I can use it for WriteLog to perhaps replace my
Win98se machine in the future or even run a 3rd radio. I just installed my
Microham Microkeyer on it and it works great with
WriteLog and the MMTTY plug-in.
I have four computers on the network - all in the same workgroup. Used the
network setup procedure for Windows. All PC's go
directly into a DHCP router. I'm not exactly a dummy at this but not a network
guru either.
Computer 1 - My main computer running Windows XP Pro Computer 2 - My wife's
computer running Windows XP Home Computer 3 - My
secondary shack computer running Windows 98 Computer 4 - Laptop running Windows
XP Media Center Edition
PROBLEM: Computer 1 and Computer 4 do not see each other on the network. And
I cannot ping between computer 1 and 4.
Computer 1 sees only 2 & 3, not 4
Computer 2 sees all computers
Computer 3 sees all computers
Computer 4 sees only 2 & 3, not 1
I turned off the firewall on 1 and 4 and that didn't make a difference.
The laptop is plugged into the router through the Ethernet network adapter plus
is connected to the router through Wi-Fi, but I've
tried disabling one or the other (hardwire & Wi-Fi) and it doesn't make a
difference, computer 1 and 4 just don't see each other.
I can actually network 1, 3 & 4 with WriteLog TCP/IP networking (computer 2
does not have WriteLog) by using Computer 3 (Win98se
machine) as the WL server and it works. Stations logged on both 1 and 4 show
up on in all three logs. But since I'm trying to
eliminate the Win98se machine, I need computer 1 and 4 to see each other.
Got to be something simple I am overlooking or just don't know about. Could
use a little help.
Thanks & 73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|