Buy some IC sockets at Radio Shack and trim to fit.....
73 Jamie WW3S
----- Original Message -----
From: "Jacoby, M G" <m.g.jacoby@lmco.com>
To: "'John'" <vk4cej@hamsnet.net>; <rtty@contesting.com>
Sent: Wednesday, September 26, 2001 10:04 AM
Subject: RE: [RTTY] PK-232's
> John,
> Those connectors are manufactured by ITW Pancon, their Mas-Con series of
> .100" IDC connectors. I was able to obtain a sample quantity of 5
connectors
> and 5 snap-on covers from their web site. Some distributors stock them,
too
> -- e.g. Newark in packs of 500. http://www.itwpancon.com
>
> They come in different versions for wire sizes AWG 28 through 24. For AWG
24
> wire, the part numbers are CE100F24-5 and EC100F-5 for the "end" connector
> and snap-on cover. You may also want the hand tool to punch down the
> insulated wire into the connector -- I bought one from Newark, p/n
MRT-100F.
>
> I haven't tried it yet, but I am guessing that other .100 headers would
mate
> OK to the PK-232 and would be less of a hassle to work with. I bought a
bag
> of the AMPMODU single row housings and contacts from Digikey to try out.
>
> 73, Mike N3MA
> m.g.jacoby@lmco.com
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
|