Hi Tom,
I have a full spec ST6000 on shelf since years.
I must have the manaul some where.
it will take a couple of days to locate it.
RX out is RS-232 compatible
you just have to make a special cable with DB9 at one end & a Molex
connector at the other one.
The demodulator is extremly simple just one 741 op amp per tone filter !
look here for some pictures
http://pagesperso-orange.fr/F6AOJ/cariboost1/crbst_24.html
73 Jeff F6AOJ
http://pagesperso-orange.fr/F6AOJ/cariboost1/crbst_0.html
>
> Message: 3
> Date: Tue, 18 Nov 2008 21:27:46 -0600
> From: "Tom Kutz" <tkutz@comcast.net>
> Subject: [RTTY] Help - ST-6000
> To: "rtty@contesting" <rtty@contesting.com>
> Message-ID: <12B5F96FC2A64D23A50B170B950CFBB0@kutz1>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi everyone,
>
> I have been monitoring this group for an number of months now but have
never
> posted until now. I am slowly getting back into RTTY after an absence of
20
> years. In that time I have gotten rid of my old model 15 but then things
> have changed a lot so I really don't miss it. I do miss the smell of hot
> oil, however. I have been using MMTTY and the computer sound card with
good
> success. Recently I picked up a used HAL ST-6000 with scope but I have no
> documentation. It appears to have been modified a little but I have no
way
> to check it out without a schematic.
>
> So, my questions are these:
> 1. Is it worth working with the ST-6000 as TU or are the sound cards
> superior?
> 2. If I am successful in getting the ST-6000 to function how do I
interface
> it to MMTTY software?
> 3. Does anyone know where I can find a schematic for the ST-6000?
>
> Any help will be greatly appreciated.
>
> Tom
> WA0LRE
> Plymouth, MN
>
> tkutz@comcast.net
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|