"There are two minor caveats however. The 2Tone window does not populate the
GRAB box, and the {CLRRX} macro command only clears the first DI window.
Both very minor and not really a problem."
The problem with the RX windows not populating the grab window was bug and
the {CLEARRX} macro will now clear all rx windows attached to the DI, Same
holds true if pressing the ClearRX button on the DI... This will be in
tomorrow's release of N1MM..
73 Rick N2AMG
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Bill, W6WRT
Sent: Monday, September 17, 2012 11:25 PM
To: RTTY Reflector
Subject: Re: [RTTY] AFSK to FSK converter
ORIGINAL MESSAGE:
On Mon, 17 Sep 2012 19:55:14 -0700, Jim wrote:
>
>Simple...
>
>Get the programmer of 2-Tone to add an AFC OFF button. And fix the
>output at
>2125/2295
>
>73
>Jim W7RY
REPLY:
There's an even easier way, thanks to VE3KI: Open a second DI window for
2Tone and use it for receive only. That way MMTTY still controls TX from the
first DI window and both windows receive simultaneously. I've been testing
it all day.
Works great.
There are two minor caveats however. The 2Tone window does not populate the
GRAB box, and the {CLRRX} macro command only clears the first DI window.
Both very minor and not really a problem.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|