Like many others that already replied, I agree that it certainly is possible
to run multiple decoders with one radio. There are many ways to set this
up. For 2011 CQWW RTTY I added a DXP38 to my station and I used the
headphone audio for that decoder. I ran it though a JPS NIR-12 filter which
has a separate headphone jack and headphone volume control. You could also
split the audio from your existing source with a Y cable like many already
suggested. I opened a separate Writelog rttyrite window for the DXP38, the
only issue is callsigns did not highlight like they do with MTTY. I'm
assuming that this is normal?
John KK9A
Subject: [RTTY] Multiple Decoders
From: Dick Flanagan <dick@k7vc.com>
Date: Tue, 31 Jan 2012 20:34:06 -0800
I know some folks run multiple RTTY decoders, with one of them often
being MMTTY and the other a DXP38. Is it possible to run these two
decoders with one radio or is SO2R necessary?
Dick
--
Dick Flanagan K7VC
dick@k7vc.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|