Planning to use this with a FT1000D and a microKeyer, so guess I
should have been more specific.
Anyone have one of the adapters and willing to turn it loose, please let
me know.
Thanks
Jim/KC4HW
On 2 Apr 2013 at 15:16, Joe Subich, W4TV wrote:
>
> If you are intending to use this with a microHAM interface, be
> aware that the connection is not the same as those in the Yaesu
> cable designed for using the desk mics with an FT-817/857/897
> or FT-900. The microHAM cable is "straight through" with all
> signal assignments performed with jumpers in the appropriate
> DB37 connector/cable.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 4/2/2013 11:57 AM, KC4HW/Jim wrote:
> > In need of one of these.
> >
> > Please reply direct to me.
> >
> > Jim/KC4HW
> >
> > PS: Guess I could make one, but thought I would try here first.
> >
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|