I ran an AL-80A for many years at 300-400 watts on RTTY and never had any
problems.
Dave, N0IT
-----Original Message-----
From: Bill, W6WRT
Sent: Monday, September 24, 2012 11:46 AM
To: RTTY Reflector
Subject: Re: [RTTY] Heathkit SB-1000 On RTTY
IGINAL MESSAGE:
On Mon, 24 Sep 2012 11:07:56 -0400, NZ4O wrote:
I have a Heathkit SB-1000 amplifier with the single 3-500Z. The manual for
the Heathkit SB-1000 says a maximum plate current of 400 mA for CW and 550
mA on SSB.
What would be a safe maximum plate current for RTTY operation, which is
obviously 100% duty cycle like AM operation?
REPLY:
I ran an SB-1000 on RTTY for several years. The weak point in that amp is
not
the tube or tank circuit, it's the power transformer. At 1kW RF output
during
RTTY contesting you will soon start to smell the transformer overheating.
Not a good smell.
Hold it down to 600 watts RF output and you can run it all day long.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|