Hi Guys,
I've been using my RASCAL interface with my TS-450 (with the cable
that sends tx audio through the mic and rx audio through the speaker
jack) for a little while now for RTTY and a little PSK, but I thought
it would be nice to be able to work true FSK, so I got the cable from
Buxcom that connects to the ACC2 jack on the rig, and it seems to do
fine with FSK.
... however I was under the impression that I would be able to do AFSK
with the same setup, and when I try to send RTTY with AFSK or try to
send PSK, all I get is a solid tone, no AFSK, no signal.
I was wondering if any of you guys have used this same setup (or
similar) with both FSK and AFSK and could tell me what I am doing
wrong.
Thanks for the help!!
73
Greg
N3ZL
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|