-----Original Message-----
From: KC5NYO [mailto:kc5nyo@kc5nyo.com]
Sent: Friday, February 11, 2005 6:51 AM
To: WI8W
Subject: RE: [RTTY] Spot Originating Stations
Guys,
If your cluster is an AR Cluster node, using this command will show
the "spotting" station at the end of the line:
sh/dx 6O0CW
The "live" spots will have the spotters State/Country at the end of the
line, "if" the sysop has this option turned on.
I've added below more commands for the AR Cluster nodes. You may
want to change to a fixed-width font like Courier New for better viewing.
Oh yeah! Lee's AR User program that Bill mentioned is a GREAT tool
for using on "any" AR Cluster node! : )
73, Mike
kc5nyo
www.kc5nyo.com
KC5NYO Telnet AR Cluster Node:
telnet://kc5nyo.dns2go.com
Normal DX Spots Queries
You may also wish to check on spots posted in the past. The general
command to do this is SHOW/DX. Without any other arguments, this
command will output the last few spots posted.
Example:
show/dx
If you want to see more spots than this you can also add an optional number
to the end of the command as in SHOW/DX/nn. This will allow you to look
at the last 20 or 30 spots.
Examples:
show/dx/20
show/dx/30
You can filter the displayed spots by band by adding a band in either wavelength
or frequency.
Examples
show/dx 14 OR show/dx 20
show/dx/20 21 OR show/dx/10 15
show/dx/20 28 OR show/dx/20 10
It is also possible to check for certain spotted callsigns.
Examples:
show/dx v73aq
show/dx/10 k5k
It is also possible to check for spots in a particular country. The ?*?
character at
the end of the command tells ARC to display all spots from the country extracted
from the callsign. To show all spots from the Marshall Islands:
Examples:
show/dx v73*
show/dx/20 V73AQ*
You can also check for DX spots across a specified frequency range.
Examples:
show/dx 21000-21050
show/dx 80 (3490 <> 3600)
show/dx 75 (3600 <> 4010)
show/dx 3 (3490 <> 4010)
You can also check for DX spots by a specific band and callsign.
Examples:
show/dx 12 vk0hi
You can also check for DX spots by a specific band and country.
Examples:
show/dx 12 vk*
If you logged off the cluster for a few minutes and then got back on, the
SHOW/DX MISSED command can be used to display a list of spots since
your last logout.
Examples:
show/dx missed
The SHOW/ZONE command can be used to display a list of spots in a
particular CQ Zone.
Examples:
show/zone 18
The SHOW/ITU command can be used to display a list of spots in a
particular ITU Zone.
Examples:
show/itu 32
The SHOW/DX STATS command will display a list of the DX spot totals for
selected intervals from the last hour to the last month.
Examples:
show/dx stats
The SHOW/VLF command can be used to display a list of VLF spots.
Examples:
show/vlf
The SHOW/IOTA command can be used to display a list of IOTA spots.
Examples:
show/iota
The SHOW/4MTR command can be used to display a list of 4 meter spots.
Examples:
show/4mtr
Formatted DX Spots Queries
The DX spot format varies based on the spot being a real-time spot or a queried
spot with e SH/DX command. This feature is by design and allows you to tell
the new real-time spots from older spots you just queried.
The SH/FDX (Formatted DX) command can be user to replace the SH/DX command
and the output will be in the real-time format. This is useful if you want to
input queried
spots into a contest program that only processes spots in the real-time format.
Examples:
show/fdx/20
show/fdx/30 v73aq
The SH/FZONE and SH/FITU can be used to display CQ zone and ITU zone spots
in the real-time format.
Examples:
show/fzone 18
show/fitu 32
Advanced DX Spots Queries
AR-Cluster also allows the user to program his own DX spot queries using SQL.
SQL queries are very powerful and allow you to build custom commands to query
the DX spot database. With some simple examples, is not too hard to pick up
some SQL basics. The SH/DX query commands can be ran against any of the
fields in the DX spot database. Note, DTS is date-time?stamp.
Examples:
sh/dx/10 where dx = 'XZ0A'
sh/dx/50 where freq > 50000.0 and freq < 54000.0
sh/dx/50 where cty = 'V7'
sh/dx/50 where spotter = 'N5CQ'
sh/dx/50 where FromNode = 'WU3V'
sh/dx/50 where CqZone = '23'
sh/dx/50 where ItuZone = '64'
sh/dx/50 where Bnd = '12'
sh/dx/50 where Mode = 'CW'
sh/dx/50 where SpotterCty = 'VE'
sh/dx/25 where SpotterSubCty = 'TX'
sh/dx/30 where Comment = 'RTTY'
sh/dx/50 where DTS > #2/1/00# AND DTS < #5/1/00#
sh/dx/50 where DTS > #2/1/02 11:00am# AND DTS < #2/1/02 12:00pm#
You can also use the LIKE operator and the wildcard character "%" to do
partial matches. To show spots with the word "QSL" anywhere in the
comment field use the following example.
Example:
sh/dx/50 where comment LIKE '%QSL%'
You can use the SQL ORDER BY operator to order the spots by date and time.
Normally you would not specify an ORDER BY operator since, you want to see
the most recent spots shown first. If you want to see older spots, you can use
the ORDER BY ASC operator.
Example:
sh/dx/30 where DX = 'XZ0A' ORDER BY DTS ASC
Compound SQL queries can be generated by combining two or more operations
into one query.
Examples:
sh/dx/50 where Mode = 'CW' AND Bnd = '10' AND spotter = 'N5CQ'
sh/dx/50 where dx = 'FO0AAA' AND DTS > #2/1/00# AND DTS < #5/1/00#
sh/dx/50 where dx = 'FO0AAA' AND comment LIKE '%QSL%'
The database fields that are available for Advanced DX Spot Queries are:
Dx
Callsign of the spotted DX
Cty
Country of the spotted DX ? follows ARRL.CTY file
Freq
Frequency of the spotted DX ? Example 14195.0
Comment
Comment in the spotted DX
Spotter
Callsign of the spotter
FromNode
Callsign of the spotting node
DTS
Date-Time-Stamp
CqZone
CQ zone for the spot
ItuZone
ITU zone for the spot
Src
AR-Cluster tag indicating the spot source for spot suckers, UserSpot = 0,
PC26Spot = 1, OH2AQSpot = 2, and MIRCSpot = 3
Bnd
Band for the spot ? Example 20
Mode
Mode for the spot ? Example SSB
SpotterCty
Country of the spotter ? follows ARRL.CTY file
SpotterSubCty
State of the spotter ? from the AR-Technology callsign database
SrcStation
Node/Station that we received the spot from
Spotting DX
To post a DX spot, use the DX command. The syntax options are shown below.
Example:
dx frequency callsign (optional comment)
dx callsign frequency (optional comment)
The frequency parameter can be in megahertz or kilohertz and is the frequency
that the station is operating on. The callsign is the callsign of the station
you
have worked or heard. The maximum length of characters in a callsign is twelve.
The optional comment can be user to tell the stations name, location or QSL
information. Don?t worry if you forget whether the frequency or callsign comes
first, ARC will sort that out for you.
Example:
dx 14088.8 ja1bn
dx ja1bn 14088.8
Once posted, the DX spot will be send to all stations in the network. It will
also be
echoed back to you as a confirmation.
If you need to do a test spot from your contest software, spot the station
TE1ST.
That is a reserved call that will not be sent throughout the network. It will
be echoed
back to you for confirmation.
> -----Original Message-----
> From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com]On
> Behalf Of WI8W
> Sent: Friday, February 11, 2005 6:07 AM
> To: RTTY
> Subject: [RTTY] Spot Originating Stations
>
>
> Shelby Wrote:
>
>
> "How much more valuable, to all, it would be, if the location of
> theoriginating station(s) for each spot were listed? I'm not really
> interested in spots generated by the "next door neighbor", of 6O, but
> would be interested if the spot was generated by my "next door neighbor"!
>
>
> I agree Shelby, but unfortunately the RTTY DX Notes I get each week never
> put in the originating station in the
> listings. That is where I got the spots from. The person asking for info was
> looking for just some indication that the
> station was active on RTTY.
>
> I use the RTTY DX Notes primarily just to know that a particular operation is
> or is not on RTTY, nothing else. My local
> DX Cluster can report past spots but I have not figured out how to do it yet.
> Your local Dx Cluster, if you use one,
> should be able to supply the same info.
>
> de WI8W
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|