----- Original Message -----
From: "Lionel Roithmeir" <roith@guernsey.net>
> Does latest SD still support WAG SSB, nothing found so far ?
Yes, nothing has changed to remove support for any contest
previously supported. Here's the setup information from
the sd-user archives at www.contesting.com for October 2004.
I will have a template option for the next update of SD.
73,
Paul EI5DI
___________________________________________________________
SD setup for non-German (DX) entrants.
Select SD Type 4 - General, Area Multipliers.
Multipliers Count : B (by band)
Points CW QSOs : 3
Points SSB QSOs : 3
Pts/Bonus : 0 (multipliers)
Name of .MLT File : WAG
Mode : CW or SSB
Mixed-Mode : Y or N (SSB-only is not an option)
Work German stations only. If you are mixed-mode, SD will
count multipliers once only per band, regardless of mode.
You may work German stations on both modes for points.
Receive RS(T) + DOK (area code), send RS(T) + Serial. SD
automatically tracks the first letter in the DOK as a potential
multiplier. You can have a maximum of 26 multipliers per band
(A-Z).
SD logs, at most, 4 DOK characters. Some stations will send
a longer code, but you will not lose points by recording only
the first four characters - I have confirmed this with DL1DTL,
the contest organiser.
_____________________________________________________________
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|