V11.01 26 August 2004
ZAP and QTC Commands:
Reinstated in SD. They went missing in 11.00 when
I combined the data input routines for SD and SDX.
Field Day (CW and SSB)
Scoring options for HB9 added - to the existing
RSGB, DARC and UBA options.
Auto CW:
Can be toggled, in any logging field, with the
apostrophe ' character. This is convenient if
you need to change Auto CW in a hurry - you
don't have to return to the callsign field to
enter the A command.
When using SD's internal keyer, apostrophe will
not work during message playback.
A reminder that Auto CW is intended only for
the F1 to F4 messages (while running or calling
CQ). When you use the F5 to F8 messages (for
searching and pouncing), Auto CW will be
disabled. You can re-enable it with apostrophe.
Auto CW is On when you see ACW, rather than CW,
as the mode.
Area Multiplier Limits:
The maximum number of different areas in a given
.MLT file is 214 - for the purposes of multiplier
tracking. If you exceed this limit, SD now logs
the new area codes, but will not identify them as
multipliers. Previously, they could not be logged.
In general, the effect of "multiplier overflow"
will simply be a lower claimed score. This will
usually not matter as Cabrillo format logs do not
have any indication of multipliers claimed, and
they are all re-scored by the organisers.
WAE - Logging QTCs.
Updated to make logging and editing easier, and
to give you a second chance to edit the callsign
(of the station sending QTCs) and the QTC
sequence number.
_________________________________________________
The programs may be downloaded from www.ei5di.com. Please
keep a copy of whatever version(s) you're using now - as
insurance!
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|