----- Original Message -----
From: "Alex, S50DX" <s50dx@yahoo.com>
> I am using home made CI-V interface described at G3VGR home page.
> The control woks fine in N1MM, HRD and under DOS with the CT and
> TR logger. In Windows also via USB-COM adapter.
Home-made interfaces are usually powered from the serial port
itself. Please let me know what pin your converter is powered
from and also (using a meter) if there actually is power on
that pin.
I assume you've used the PORTS command to define the com port for
rig control - and that things look right when using the STATUS
command.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|