Paul
My FTDX5000 has a problem.
The CAT is not working, defective.
I use it in combination with SD.
At a certain moment SD did not receive data from the transceiver.
The green LED on the transceiver was OFF.
At startup SD mentions that there is no link with the tranceiver (no Rig
control, or a simular message).
Now I have to change BAND and MODE manual.
Yesterday in the PACC contest at a certain moment the SD program also went
wrong.
I could change the BAND, but after one or two seconds the change ended and SD
went back to the old BAND.
I tried this a number of times, but with the same result. The band remained
locked.
Then I checked the parameters under PORTS.
The USB port was still selected.
Now I changed the selection to 0.
And after this I could change BAND and MODE without a problem.
To my opinion there must not be a lock on BAND changing when the communication
is not functioning.
73
Jan Hoek – PA0JNH
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|