Hello Paul
Thanks for your answer. The circuit is powered by DTR (pin4).
And I can measure negative Voltage on that pin. And yes, I did
try different settings with POLLTIME and LINKTIME.
Are the settings in IC706.SD the same for all 706 rigs? As in other
programs I have to choose 706MK2G to make it work?
Vy 73 de Alex, S50DX
From: "Paul O'Kane"
Subject: Re: [SD-User] SD and IC706mk2g ?!
Home-made interfaces are usually powered from the serial port
itself. Please let me know what pin your converter is powered
from and also (using a meter) if there actually is power on
that pin.
I assume you've used the PORTS command to define the com port for
rig control - and that things look right when using the STATUS
command.
73,
Paul EI5DI
Aleksander Hocevar, S50DX
Cecovje 4, 2390 Ravne na Koroskem, Slovenia
Tel.: +386 2 821 88 99, GSM +386 4 043 68 49
---------------------------------
Do you Yahoo!?
Next-gen email? Have it all with the all-new Yahoo! Mail Beta.
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|